Gabriella Mono patró de costura PDF

£ 5.20

categories: ,

Descripció del producte

Gabriella Mono patró de costura PDF

The Gabriella Jumpsuit is a loose fit, full length jumpsuit featuring shoulder straps and a side tie that sits on the hips. The trouser hems are elasticated as well as the waistline to create the gathers.

This jumpsuit should ideally be made using a woven fabric like cotton lawn or voile

Disponible en mides: 4 / 6 / 8 / 10 / 12 / 14 / 16 / 18

Si us plau, veure el GABRIELLA TUTORIAL aquí.

Printing instructions can be found here.

All patterns come as full scale documents to allow you to print on different sized pages as well as A4 and US Letter sized documents.

Every download comes with a tutorial with colour diagrams or photographs. You can download your pattern an unlimited amount of time directly from your account area or via your specific download link sent via email. Save files directly to your computer for future use.

A 1.5cm seam allowance is included on all pattern pieces unless otherwise stated.


Links ràpids:

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

DesarDesar

DesarDesar

DesarDesar

La compra d'un patró és fàcil!

  • Afegiu el producte a la cistella fent clic al botó 'Afegir a la cistella'
  • Introdueixi les seves dades en la Comanda
  • Feu clic al 'Feu PAYPAL' botó
  • Accedeix al teu compte de Paypal o triar al pagament i enviament com a convidat
  • Efectuar el pagament mitjançant el seu mètode preferit
  • DONE!

Quan el pagament s'ha realitzat, que normalment només triga uns segons, se li redirigeix ​​a la Tailoress® on es pot veure la seva comanda en meu compte (si ja tenia un o triar per crear un moment de pagar). Des de la seva àrea compte, també pot descarregar els seus arxius. Després del pagament també rebrà una notificació per correu electrònic per fer-li saber els detalls de la comanda en breu seguit d'un altre correu electrònic amb l'enllaç de descàrrega.

Paypal és un mètode segur i segur de la compra a internet. Vostè no necessita un compte de Paypal per comprar des del Tailoress®.

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

DesarDesar

DesarDesar

DesarDesar

Patró es presenta com un document PDF Copyshop escala completa que es pot imprimir en paper de qualsevol mida usant Adobe Reader per a la impressió del cartell. Also available broken up onto A4 and US Letter sized pages. Les pàgines independents tenen números de pàgina i marcadors per ajudar a alinear correctament cada pàgina després de la impressió.

Si us plau, veure el Instruccions per imprimir per esbrinar com imprimir amb precisió el patró a escala.

TOP: mida Copyshop: 70cm x 62cm / pàgines A4: 12 / Carta EUA: 12

TROUSERS: mida Copyshop: 59cm x 199cm / pàgines A4: 24 / Carta EUA: 24

WAISTBAND & CUFF: mida Copyshop: 18.5cm X 130cm / pàgines A4: 5 / Carta EUA: 6

Recordeu que totes les descàrregues de patrons estan en Anglès, però és possible veure el tutorial aquí en l'idioma elegit per seleccionar la vostra llengua preferida fent clic “TRADUIR” a la part superior dreta de qualsevol pàgina i seleccionar l'idioma preferit al menú desplegable.

Gabriella Jumpsuit Tutorial

Gabriella Jumpsuit Tutorial

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit Tutorial

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit Tutorial

Les imatges estan disponibles en el patró de descàrrega.

1.5cm seam allowance included
Curta totes les peces del patró.

Fold the TIE LOOPS in half as shown on the pattern piece. Stitch and cut along the CUTLINE.

Fold the WAISTBAND LOOP in half as shown on the pattern piece and stitch.

Turn the TIE LOOPS and WAISTBAND LOOP RIGHT SIDES OUT. premsa.

Lay the FRONT RIGHT SIDES together with the BACK.

Pin and stitch the side seam allowances.

Finish the seam allowance using zig-zags stitch or an overlocker.

Finish the underarm and neckline sections. The above diagram shows the method of using a custom cut strip of bias. If you are using prepared bias please adapt to suit your bias width. For custom bias make yours approx. 4.5cm x 50cm long for the armholes and 4.5cm x 30cm long for the neckline seam allowances.

Pin the bias strip in place along the underarm section. Cosir una assignació de 1,5 cm de la costura.
Trim the seam allowance to about 7.5mm.
Fold over the outer edge of the bias by 1cm.
Fold the bias strip over and around the raw edge to conceal. Pin in place on the WRONG SIDE. Use a hand stitch such as slip stitch to secure the bias in place or topstitch close to the seam line.

Fold the TIE LOOPS in half and align the raw edges with the unfinished shoulders of the garment.

Pin i de la puntada. Top-stitch the seam allowances flat.

Take FRONT and BACK TROUSER pieces and lay RIGHT SIDES together.

agulla, stitch and finish the side seam allowances.

Repetiu per a l'altre costat.

Insert one TROUSER into another, Dret amb dret.

Align the crotch seam allowance.

agulla, stitch and finish beginning at either centre front or back and continuing to the opposite center.

Take the TROUSER CUFFS and ELASTIC WAISTBAND.

Fold in half lengthways and sew the seam allowances.

Turn RIGHT SIDES out.

Prepare the lengths of elastic by overlapping the seam allowances and stitching to create rounds.

Fold the CUFFS in half so as to match the raw edges.

Insert the cuff elastic between the fabric layers, concealing it.

Align the raw edges of the CUFF to the end of the TROUSER leg. Pin i la puntada en el seu lloc. Finish the seam allowance as before.

Repeat for the opposite leg.

Fold the ELASTIC WAISTBAND in half, matching the raw edges.

Insert the waistband elastic between the layers.

Pin and stitch the ELASTIC WAISTBAND RIGHT SIDES together with the TROUSER waistline.

Stitch within the seam allowance to allow this row of stitches to be hidden once the FRONT and BACK are sewn on.

Turn the FRONT and BACK WRONG SIDES out.

Match the waistline to that of the TROUSER and ELASTIC WAISTBAND.

Fold the WAISTBAND LOOP in half and insert the raw edges into the seam allowance between the upper garment and the TROUSER at one of the side seams. (Choose the opposite side to that which you want your tie to hang).

agulla, stitch and finish the seam allowance.

Fold the WAISTBAND in half along its width RIGHT SIDES together. Sew the seam allowance, sew one end closed but leave one open.

Turn the WAISTBAND RIGHT SIDES out through the open end.

Fold back the seam allowance of the open end and sew closed using a small hand stitch such as whip stitch.

Complete the garment by creating the TIES (follow the TIE & STRAP TUTORIAL) and inserting into the TIE LOOPS.

Download the Gabriella Jumpsuit PDF Sewing Pattern here

DesarDesar

opinions

Cap comentari encara.

Únicament els clients que hagin adquirit aquest producte pot deixar un comentari.



vestits de bany

Visita la nostra gamma de models de vestit de bany