Children’s Bunny – Playsuit traxe Pyjama estándar PDF

£ 4.00

Clear

Descrición do produto

coello – Playsuit traxe Pyjama estándar PDF

Crear un super bonito e sorprendentemente cómodo all-in-one playsuit / sleepsuit / traxe para o seu pequeno. Estes claro paso a paso as instrucións e ter a opción de simplemente adaptar o seu playsuit para nenos máis cun capuz extraíble e fronte e ocos de perna. Tan popular cos nenos de todas as idades!

Información adicional

SIZE

0-2, 3-8, 9-14

The Tailoress PDF Sewing Patterns - Children's Bunny - Playsuit Costume Pyjama PDF Pattern

The Tailoress PDF Sewing Patterns - Children's Bunny - Playsuit Costume Pyjama PDF Pattern

The Tailoress PDF Sewing Patterns - Children's Bunny - Playsuit Costume Pyjama PDF Pattern

The Tailoress PDF Sewing Patterns - Children's Bunny - Playsuit Costume Pyjama PDF Pattern

SaveSave

SaveSave

SaveSave

A compra dun estándar é fácil!

  • Engadir o produto ao seu carro, premendo no botón "engadir á cesta"
  • Informe os seus datos na Caixa
  • Prema no botón 'proceder ao PAYPAL' botón
  • Entre na súa conta Paypal ou optar por facer o checkout como convidado
  • Facer o pago mediante o método preferido
  • DONE!

Xa que o seu pagamento está completo, que normalmente leva só uns segundos, será redirixido ao seu Tailoress® onde podes ver o seu fin na miña conta (Se xa tivo un ou escolleu para crear un no check-out). A partir da súa área de conta que tamén pode descargar os seus arquivos. Tras o pago, tamén recibirá unha notificación por correo electrónico para que vostede sabe os detalles da solicitude pronto seguido por outro correo electrónico que contén a ligazón para descargar.

PayPal é un método seguro e seguro de mercar a través de Internet. Non precisa de unha conta Paypal para compra a partir do Tailoress®.

The Tailoress PDF Sewing Patterns - Children's Bunny - Playsuit Costume Pyjama PDF Pattern

The Tailoress PDF Sewing Patterns - Children's Bunny - Playsuit Costume Pyjama PDF Pattern

SaveSave

SaveSave

SaveSave

Estándar ven como un documento PDF Copyshop fullscale que pode ser impreso en calquera tamaño de papel usando o Adobe Reader para impresión do cartel. Tamén roto dispoñibles superior páxinas A4. As páxinas A4 separados os números de páxina e marcadores para axudar a aliñar cada páxina correctamente despois da impresión.

Por favor, vexa o Instrucións de impresión para descubrir como obter unha impresión exacta seu patrón para dimensionar.

0-2: tamaño Copyshop: 60cm x 80cm / A4: 12 / US Letter: 12

3-8: tamaño Copyshop: 68cm x 173cm / A4: 20 / US Letter: 20

9-14: tamaño Copyshop: 71cm x 153cm / A4: 24 / US Letter: 24

Please note that all pattern downloads are in English, however you may view the tutorial here in your chosen language by selecting your preferred language by clicking “Traducir” at the top right of any page and selecting your preferred language from the drop down menu.

Bunny Rabbit Costume Playsuit Pyjama Tutorial
The Tailoress PDF Sewing Patterns - Bunny Rabbit Costume Playsuit Pyjama Tutorial

The Tailoress PDF Sewing Patterns - Bunny Rabbit Costume Playsuit Pyjama Tutorial

The Tailoress PDF Sewing Patterns - Bunny Rabbit Costume Playsuit Pyjama Tutorial

Cut out all pieces marking any balance marks using tailor’s tacks.

Use a ballpoint sewing machine needle on a medium size stitch.

Match the front and back shoulder seams and pin and stitch,

Trim the seam allowance then overlock or zig-zag the seam. From now on this will be referred to as “finishing” the seam allowance.

Ease the sleeve into the armhole.

Start by pinning the centre of the sleeve to the shoulder seam. Then pin to either side of the armhole then ease the rest into the armhole. Finish the seam.

Lay the Front and back garments of the garment Right Sides together.

Pin from the sleeve cuff down to the the leg cut. Ensure to match the underarm seams.

Stitch and finish the seams.

Turn to the “Adaptation for Young Children Tutorial” now if you want to create this pattern with a detachable hood with front and leg opening.

Finish the seam allowance of the Centre Front down to the crotch.

Pin the inside leg seams from leg cuff to crotch.

Stitch and finish the seam allowance.

Turn one half of the garment Right Side out. Insert this half’s leg into the other which should be Wrong Sides out.

Pin the Centre Front and Centre Back seam allowance together all the way down the front and up the back of the garment including the crotch.

Stitch normally until you reach the Zip End marker. Then do a couple of backstitches and switch to a larger stitch. Continue along the seam allowance with the larger stitch.

Finish the seam allowance up until the Zip End marker.

Open up the garment with WS out and lay flat. Open up the Centre Front seam allowance and lay the zip onto it. Pin the zip to the seam allowances (not the garment).

Use a zip foot and stitch the zip to the seam allowances.

Take the cuffing pieces and stitch together the seam allowances to create tubes.

Fold the cuffing in half and ease around the corresponding sleeve and leg ends, RS facing.

Pin, stitch and finish.

Carefully open up the CF seam to the Zip End mark.

Create the ears by folding in half RS together. Pin then stitch the darts. Trim the seam allowance.

Lay the inner and outer ear pieces RS together. Pin and stitch the outer seam allowances together.

Turn RIGHT SIDES out.

Pin Outer Hood 1 to Outer Hood 2 RS together. Insert the ear matching its centre to the Ear Insertion Point.

punto.

 

Lay the Inner Hood pieces RS together and pin. Lay the Outer Hood pieces RS together and pin.

Stitch and trim the seam allowances.

 

Place the Inner and Outer hoods inside one another. Pin the seam allowance along the hood opening and stitch.

 

Trim the seam allowance of the hood opening.

 

Clip the cross section of the Hood seam allowances, within the seam allowance.

This enable it to lay flatter when turned to the RS.

Turn the hood RS out and pin the hood opening seam flat.

To stitch close to the edge of the opening.

Also stitch a row approx. 5cm long across the centre semaphore Hood 1 and Hood 2 meet to keep the hood steady during wear.

 

Pin the Hood neckline onto the neckline of the playsuit, match centre seams and end points then ease the rest in.

Grade the neckline seam allowance leaving the Inner Hood seam allowance the longest so it conceals the others.

Clip the seam cross sections as in Step 20.

 

RS facing, pin the neckline seam allowance down and top stitch the neckline.

 

To make the Tail, pin and stitch all the darts.

Turn RS out.

At this point you may choose to stuff the tail with wadding or other material, although it is not necessary.

Cut a small piece of velcro approx. 2cm long.

Pin and stitch the softer part to the garment at the Tail Insertion point.

Pin and stitch the coarser part to the tail, covering the small opening.

Clip the seam cross sections as in Step 20.

Purchase the Bunny Costume in sizes 0-2 years here

Purchase the Bunny Costume in sizes 3-8 years here

Purchase the Bunny Costume in sizes 9-14 years here

SaveSave



roupa de baño

Ver a nosa gama de modelos de maio