Images are available in the pattern download.
Begin by cutting out the pattern pieces.
With RIGHT SIDES together, fold the darts. Pin, stitch and trim the seam allowance of the dart.
With the two hat pieces RIGHT SIDES together, pin around the seam allowance, leaving the lower edge open.
Pin ,stitch and trim the seam allowances.
Repeat Step 1 & 2 for the remaining two hat pieces.
Place one hat inside the other RIGHT SIDES together.
Pin and stitch the seam allowances of the lower edge, leaving a gap open approx. 7cm wide to allow you to turn to the RIGHT SIDES.
Trim the seam allowances.
Turn RIGHT SIDES out. Use a small hand-stitch to secure the 7cm opening.