Eloise Top & Dress Tutorial
[printfriendly]
Images kasedhiya ing download pola.
[wc_accordion collapse=”0″ leaveopen=”0″ kelas =”” layout=”box”]
[wc_accordion_section title=”Step 1″]
1.5cm lapisan sangu klebu
Cut metu kabeh bêsik pola.
Place the SHOULDER piece RIGHT SIDES together with the SHOULDER LINING.
Pin and stitch around the neckline and centre backs and along the shoulder seam allowances.
Clip and trim the curved seam allowances to allow them to lie flat once turned to the RIGHT SIDE.
Turn RIGHT SIDES out and press.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Using a hand stitch or using the largest stitch on your machine, sew a line of straight stitch between the GATHER marks on the BACK piece. Sew midway along the seam allowance
Loop the thread in a figure of eight around a pin at one end then gently pull the thread to form the gathers. When you have gathered enough so the fabric fits between the GATHER marks on the SHOULDER piece, secure in a figure of eight around another pin.
Repeat for the FRONT.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Kanthi sandhangan lorone WRONG metu, align the FRONT and BACK side seam allowances.
Pin, panggil lan rampung.
Pencet.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
Finish the SIDE underarm section. Ing diagram ing ndhuwur nuduhake cara nggunakake Strip adat Cut Bias. Yen sampeyan nggunakake Bias disiapake please ngganti sing cocog karo jembaré Bias Panjenengan. Kanggo Bias adat nggawe Yours approx. 4.5cm x 30cm long, you will need 2.
Pin Strip Bias ing panggonan sadawane bagean underarm. Nggawe sangu 1.5cm lapisan.
Motong sangu lapisan kanggo babagan 7.5mm.
Melu liwat pinggiran njaba saka Bias dening 1cm.
Melu Strip Bias liwat lan sak pinggiran mentahan kanggo ndhelikake. Pin ing Panggonan ing SIDE WRONG. Gunakake nggawe tangan kayata slip nggawe kanggo ngamanake Bias ing panggonan utawa topstitch cedhak baris lapisan.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
Lay the FRONT and SHOULDER RIGHT SIDES together.
Pin lan nggawe. Remove the hand stitching that formed the gathers originally.
Finish the seam allowance using zig-zag stitch or an overlocker.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Repeat STEP 5 for the BACK and SHOULDER.
The SHOULDER centre back pieces will meet at the centre back of the BACK.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Complete the garment by adding a hook and eye or loop and button at the top centre back.
Finish the hem with a hemmer foot or create a rolled hem by hand.
[/wc_accordion_section]
[/wc_accordion]
Download the Eloise Top & Dress PDF Sewing Pattern here