Joey Tee Tutorial

Joey Tee Tutorial

The Tailoress PDF Sewing Patterns - Joey Tee Tutorial

The Tailoress PDF Sewing Patterns - Joey Tee Tutorial

Images are available in the pattern download.

Cut out all pieces marking any balance or ease marks. This garment will have reasonable stretch to it so it is recommended to use zig-zag stitch wherever a seam is constructed.

Lay the front edge of the SLEEVE armhole to the FRONT armhole, RIGHT SIDES together.

Pin and stitch the seam allowance.

Repeat for the other FRONT side.

Lay the back SLEEVE armhole to the BACK armhole RIGHT SIDES together.

Pin and stitch the seam allowance.

Repeat for the other BACK side.

Finish all sleeve seam allowances using an overlocker or zig-zag stitch. Trim if necessary.

With the garment WRONG SIDES out, align the side seams and SLEEVE seams.

Pin and stitch continuously from SLEEVE cuff to the garment hem.

Finish the seam allowances as before.

WITHOUT HOOD:
Fold in half the NECK CUFF RIGHT SIDES together and sew the short seam allowance.

Fold the NECK CUFF in half so that the raw edges meet.

Ease around the garment neckline. Pin and stitch in place.

For HOOD see Steps 5-7.

WITH HOOD:
Lay two HOOD pieces RIGHT SIDES together. Pin and stitch the center back seam allowance. Trim and finish the seam allowance with zig-zag stitch or an overlocking stitch.

Complete the hood by folding the front opening seam allowance back 0.75mm then again 0.75mm. Pin and stitch in place to finish the seam.

 

Ease the neckline of the HOOD on to the garment neckline. Overlap the centre front edges of the HOOD by 1.5cm onto each other.

ಪಿನ್ ಮತ್ತು ಹೊಲಿಗೆ. ಸೀಮ್ ಭತ್ಯೆ ಮುಕ್ತಾಯ.

You may like to top-stitch the seam allowance flat towards the bottom of the garment.

Complete the garment hem and cuffs by finishing the seam allowance, then folding it back 1.5cm and top-stitching to secure.

ಎಲ್ಲಾ ಸ್ತರಗಳು ಅದುಮು.

 

Download the JOEY TEE PDF Sewing Pattern here