Cut out all the pattern pieces.
Mark the SIDE SEAM POINT on the FRONT and BACK pieces.
Finish the outer curved edge of the WINGS with your trim. First lay the trim RIGHT SIDES together with the WING. Stitch the seam allowance. Trim the seam allowance then fold back. Top stitch close to the trim and press.
Finish the SIDE underarm section. The above diagram shows the method of using a custom cut strip of bias. If you are using prepared bias please adapt to suit your bias width. For custom bias make yours 1m x 4.5cm.
Pin the bias strip in place along the underarm section. Stitch a 1.5cm seam allowance.
Trim the seam allowance to about 7.5mm.
Fold over the outer edge of the bias by 1cm.
Fold the bias strip over and around the raw edge to conceal. Pin in place on the WS. Use a hand stitch such as slip stitch to secure the bias in place.
Repeat this step for the neckline.
bikirin de Annabelle Tunic PDF Sewing Pattern