Frane Jumper Dress Tutorial

The Tailoress PDF Sewing Patterns - Frane Jumper Dress Tutorial

The Tailoress PDF Sewing Patterns - Frane Jumper Dress Tutorial

 

Cut out all pieces marking any balance or ease marks. This garment will have reasonable stretch to it so it is recommended to use zig-zag stitch wherever a seam is constructed.

Lay the front edge of the Sleeve armhole to the ຫນ້າ armhole, Right Sides together.

Pin and stitch the seam allowance.

Repeat for the other ຫນ້າ side.

Lay the back Sleeve armhole to the ກັບຄືນໄປບ່ອນ armhole RS together.

Pin and stitch the seam allowance.

Repeat for the other ກັບຄືນໄປບ່ອນ side.

Finish all sleeve seam allowances using an overlocker or zig-zag stitch. Trim if necessary.

With the garment Wrong Sides out, align the side seams and Sleeve seams.

Pin and stitch continuously from Sleeve cuff to the garment hem.

Finish the seam allowances as before.

Fold in half the Sleeve Cuffs, Neckline Cuff ແລະ ເຂົາ Cuff.

Stitch the seam allowance then fold in half along the fold line shown on the pattern piece, WS together.

With the Cuffs folded in half, pin each evenly around their matching garment part, RS together.

To do this find the centre front, centre back and sides by folding the cuff pieces in half twice. Place a pin in each location. Repeat with the neckline, sleeves and hem. Match up the pins then ease the rest of the cuff in.

Turn the cuffs RS out so the seam is concealed.

Top-stitch with zig-zag close to the neckline seam to strengthen and give better shape.

You may also like to top-stitch around the Sleeve Cuffs ແລະ ເຂົາ but it is not necessary.

 

Purchase the Frane Jumper Dress ຮູບແບບ PDF Sewing here

Shares