Gabriella Jumpsuit PDF Šūšanas Pattern

£ 5.20

Kategorijas: ,

Produkta apraksts

Gabriella Jumpsuit PDF Šūšanas Pattern

The Gabriella Jumpsuit is a loose fit, full length jumpsuit featuring shoulder straps and a side tie that sits on the hips. The trouser hems are elasticated as well as the waistline to create the gathers.

This jumpsuit should ideally be made using a woven fabric like cotton lawn or voile

Pieejami izmēros: 4 / 6 / 8 / 10 / 12 / 14 / 16 / 18

Lūdzu, apskatiet GABRIELLA TUTORIAL šeit.

Drukāšanas instrukcijas var atrast šeit.

All patterns come as full scale documents to allow you to print on different sized pages as well as A4 and US Letter sized documents.

Katru lejupielāde nāk ar pamācību ar krāsu diagrammām vai fotogrāfijām. Jūs varat lejupielādēt jūsu modelis neierobežotu laiku tieši no sava konta teritorijā vai caur jūsu konkrēto lejupielādes saiti nosūtīts pa e-pastu. Saglabājiet failus tieši uz jūsu datoru izmantošanai nākotnē.

1,5 cm šuves pabalstu ir iekļauts visās modelis gabaliem ja vien nav norādīts citādi,.


Ātrās saites:

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

SaglabātSaglabāt

SaglabātSaglabāt

SaglabātSaglabāt

Purchasing modelis ir viegli!

  • Pievienojiet produktu grozā, noklikšķinot uz pogas "Pievienot grozam"
  • Ievadiet savus datus šajā Checkout
  • Noklikšķiniet uz "Turpināt PayPal 'pogu
  • Piesakieties savā PayPal kontā vai izvēlēties Norēķināties kā viesis
  • Padarīt maksājumu, izmantojot jūsu izvēlēto metodi
  • DONE!

Kad jūsu maksājums ir pabeigta, kas parasti aizņem tikai dažas sekundes, Jums tiks novirzīts atpakaļ Tailoress® kur jūs varat apskatīt savu pasūtījumu Mans konts (Ja jums jau ir viens vai izvēlaties veidot vienu pēc izrakstīšanās). No jūsu konta apgabalā varat arī lejupielādēt failus. Samaksājot jūs arī saņemsiet e-pasta paziņojumu, lai jūs zināt par pasūtījumu drīz seko citam e-pasta, kas satur jūsu lejupielādes saiti.

Paypal ir droša un droša metode iepērkoties internetā. Jums nav nepieciešams Paypal kontu, lai iegādātos no The Tailoress®.

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

SaglabātSaglabāt

SaglabātSaglabāt

SaglabātSaglabāt

Modelis nāk kā fullscale Copyshop PDF dokumentu, ko var izdrukāt uz jebkura izmēra papīra, izmantojot Adobe Reader, lai plakāta drukāt. Also available broken up onto A4 and US Letter sized pages. The separate pages have page numbers and markers to help you align each page correctly after printing.

Lūdzu, apskatiet Poligrāfijas Instrukcijas lai uzzinātu, kā precīzi izdrukāt modeli mēroga.

TOP: Copyshop izmērs: 70cm x 62cm / A4 Pages: 12 / US Letter: 12

TROUSERS: Copyshop izmērs: 59cm x 199cm / A4 Pages: 24 / US Letter: 24

WAISTBAND & CUFF: Copyshop izmērs: 18.5cm X 130cm / A4 Pages: 5 / US Letter: 6

Lūdzu, ņemiet vērā, ka visas modelis lejupielāde ir angļu valodā, Tomēr jūs varat apskatīt apmācība šeit jūsu izvēlētajā valodā, izvēloties sev vēlamo valodu, noklikšķinot “TRANSLATE” augšējā labajā jebkuras lapas un izvēloties vēlamo valodu no nolaižamajā izvēlnē.

Gabriella Jumpsuit Tutorial

Gabriella Jumpsuit Tutorial

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit Tutorial

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit Tutorial

Images are available in the pattern download.

1.5cm seam allowance included
Izgriezt visus modeli gabalu.

Fold the TIE LOOPS in half as shown on the pattern piece. Stitch and cut along the CUTLINE.

Fold the WAISTBAND LOOP in half as shown on the pattern piece and stitch.

Turn the TIE LOOPS and WAISTBAND LOOP RIGHT SIDES OUT. prese.

Lay the FRONT RIGHT SIDES together with the BACK.

Pin and stitch the side seam allowances.

Finish the seam allowance using zig-zags stitch or an overlocker.

Finish the underarm and neckline sections. The above diagram shows the method of using a custom cut strip of bias. If you are using prepared bias please adapt to suit your bias width. For custom bias make yours approx. 4.5cm x 50cm long for the armholes and 4.5cm x 30cm long for the neckline seam allowances.

Pin the bias strip in place along the underarm section. Stitch a 1.5cm seam allowance.
Trim the seam allowance to about 7.5mm.
Fold over the outer edge of the bias by 1cm.
Fold the bias strip over and around the raw edge to conceal. Pin in place on the WRONG SIDE. Use a hand stitch such as slip stitch to secure the bias in place or topstitch close to the seam line.

Fold the TIE LOOPS in half and align the raw edges with the unfinished shoulders of the garment.

Pin un valdziņš. Top-stitch the seam allowances flat.

Take FRONT and BACK TROUSER pieces and lay RIGHT SIDES together.

tapa, stitch and finish the side seam allowances.

Atkārtot uz otru pusi.

Insert one TROUSER into another, Labās puses kopā.

Align the crotch seam allowance.

tapa, stitch and finish beginning at either centre front or back and continuing to the opposite center.

Take the TROUSER CUFFS and ELASTIC WAISTBAND.

Fold in half lengthways and sew the seam allowances.

Pagrieziet labās puses out.

Prepare the lengths of elastic by overlapping the seam allowances and stitching to create rounds.

Fold the CUFFS in half so as to match the raw edges.

Insert the cuff elastic between the fabric layers, concealing it.

Align the raw edges of the CUFF to the end of the TROUSER leg. Pin un dūrienu vietā. Finish the seam allowance as before.

Repeat for the opposite leg.

Fold the ELASTIC WAISTBAND in half, matching the raw edges.

Insert the waistband elastic between the layers.

Pin and stitch the ELASTIC WAISTBAND RIGHT SIDES together with the TROUSER waistline.

Stitch within the seam allowance to allow this row of stitches to be hidden once the FRONT and BACK are sewn on.

Turn the FRONT and BACK WRONG SIDES out.

Match the waistline to that of the TROUSER and ELASTIC WAISTBAND.

Fold the WAISTBAND LOOP in half and insert the raw edges into the seam allowance between the upper garment and the TROUSER at one of the side seams. (Choose the opposite side to that which you want your tie to hang).

tapa, stitch and finish the seam allowance.

Fold the WAISTBAND in half along its width RIGHT SIDES together. Sew the seam allowance, sew one end closed but leave one open.

Turn the WAISTBAND RIGHT SIDES out through the open end.

Fold back the seam allowance of the open end and sew closed using a small hand stitch such as whip stitch.

Complete the garment by creating the TIES (follow the TIE & STRAP TUTORIAL) and inserting into the TIE LOOPS.

Download the Gabriella Jumpsuit PDF Sewing Pattern here

SaglabātSaglabāt

atsauksmes

Vēl nav klientu atsauksmes.

Tikai pieteicies klientiem, kuri ir iegādājušies šo produktu, var atstāt atsauksmi.



peldkostīmi

Skatīt mūsu klāstu peldkostīmu modeļus