Bunny – Playsuit Costume Pyjama PDF Pattern
Pangani wapamwamba wokongola ndi modabwitsa omasuka zonse mu umodzi playsuit / sleepsuit / zovala wina wanu wamng'ono. Kutsatira mapazi bwino ndi sitepe malangizo ndi mwayi chabe atengere playsuit anu ana aang'ono ndi nyumba zochotseka ndi patsogolo ndi mwendo mipata. Wotchuka ndi ana a mibadwo yonse!
Purchasing a pattern is easy!
- Add the product to your cart by clicking the ‘ADD TO CART’ button
- Enter your details in the Checkout
- Click the ‘PROCEED TO PAYPAL’ button
- Login to your Paypal account or choose to checkout as a guest
- Make the payment using your preferred method
Once your payment is complete, which normally takes only a few seconds, you will be redirected back to The Tailoress® where you can view your order in My Account (if you already had one or chose to create one at checkout). From your account area you can also download your files. Upon payment you will also receive an email notification to let you know your order details shortly followed by another email containing your download link.
Paypal is a safe and secure method of purchasing over the internet. You do not need a Paypal account to purchase from The Tailoress®.
Chitsanzo umabwera ngati fullscale copyshop PDF chikalata sipangakhalenso kupulinta kukula kulikonse ntchito Adobe Reader kuti chithunzi kusindikiza. Likupezeka wosweka pa tsamba A4. The osiyana masamba A4 ndi nambala za masamba ndi zolembera kukuthandizani agwirizane tsamba lililonse molondola pambuyo yosindikiza.
Chonde kuona yosindikiza Malangizo kupeza mmene molondola kusindikiza chitsanzo chanu onga.
0-2: Copyshop kukula: 60cm x 80cm / A4: 12 / US Letter: 12
3-8: Copyshop kukula: 68cm x 173cm / A4: 20 / US Letter: 20
9-14: Copyshop kukula: 71cm x 153cm / A4: 24 / US Letter: 24
Chonde dziwani kuti kukopera zonse chitsanzo ali English, Koma mukhoza kuona phunziro pano m'chinenero chanu osankhidwa ndi kusankha m'chinenero chanu yochezera mwa kuwonekera “KUMASULIRA” kudzanja pamwamba pa tsamba lililonse ndi kusankha m'chinenero chanu yochezera pa dontho pansi menyu.
Bunny Rabbit Costume Playsuit Pyjama Tutorial
Cut out all pieces marking any balance marks using tailor’s tacks.
Use a ballpoint sewing machine needle on a medium size stitch.
Match the front and back shoulder seams and pin and stitch,
Trim the seam allowance then overlock or zig-zag the seam. From now on this will be referred to as “finishing” the seam allowance.
Ease the sleeve into the armhole.
Start by pinning the centre of the sleeve to the shoulder seam. Then pin to either side of the armhole then ease the rest into the armhole. Finish the seam.
Lay the Front and back garments of the garment Right Sides together.
Pin from the sleeve cuff down to the the leg cut. Ensure to match the underarm seams.
Stitch and finish the seams.
Turn to the “Adaptation for Young Children Tutorial” now if you want to create this pattern with a detachable hood with front and leg opening.
Finish the seam allowance of the Centre Front down to the crotch.
Pin the inside leg seams from leg cuff to crotch.
Stitch and finish the seam allowance.
Turn one half of the garment Right Side out. Insert this half’s leg into the other which should be Wrong Sides out.
Pin the Centre Front and Centre Back seam allowance together all the way down the front and up the back of the garment including the crotch.
Stitch normally until you reach the Zip End marker. Then do a couple of backstitches and switch to a larger stitch. Continue along the seam allowance with the larger stitch.
Finish the seam allowance up until the Zip End marker.
Open up the garment with WS out and lay flat. Open up the Centre Front seam allowance and lay the zip onto it. Pin the zip to the seam allowances (not the garment).
Use a zip foot and stitch the zip to the seam allowances.
Take the cuffing pieces and stitch together the seam allowances to create tubes.
Fold the cuffing in half and ease around the corresponding sleeve and leg ends, RS facing.
Pin, stitch and finish.
Carefully open up the CF seam to the Zip End mark.
Create the ears by folding in half RS together. Pin then stitch the darts. Trim the seam allowance.
Lay the inner and outer ear pieces RS together. Pin and stitch the outer seam allowances together.
Pin Outer Hood 1 to Outer Hood 2 RS together. Insert the ear matching its centre to the Ear Insertion Point.
Lay the Inner Hood pieces RS together and pin. Lay the Outer Hood pieces RS together and pin.
Stitch and trim the seam allowances.
Place the Inner and Outer hoods inside one another. Pin the seam allowance along the hood opening and stitch.
Trim the seam allowance of the hood opening.
Clip the cross section of the Hood seam allowances
, within the seam allowance
This enable it to lay flatter when turned to the RS.
Turn the hood RS out and pin the hood opening seam flat.
To stitch close to the edge of the opening.
Also stitch a row approx. 5cm long across the centre semaphore Hood 1 and Hood 2 meet to keep the hood steady during wear.
Pin the Hood neckline onto the neckline of the playsuit, match centre seams and end points then ease the rest in.
Grade the neckline seam allowance leaving the Inner Hood seam allowance the longest so it conceals the others.
Clip the seam cross sections as in Step 20.
RS facing, pin the neckline seam allowance down and top stitch the neckline.
To make the Tail
, pin and stitch all the darts
Turn RS out.
At this point you may choose to stuff the tail with wadding or other material, although it is not necessary.
Cut a small piece of velcro approx. 2cm long.
Pin and stitch the softer part to the garment at the Tail Insertion point.
Pin and stitch the coarser part to the tail, covering the small opening.
Clip the seam cross sections as in Step 20.
Purchase the Bunny Costume in sizes 0-2 years here
Purchase the Bunny Costume in sizes 3-8 years here
Purchase the Bunny Costume in sizes 9-14 years here