Images are available in the pattern download.
1.5cm seam allowance included
Lay the FRONT EDGING RIGHT SIDES together with the top FRONT. Ease on and pin in place. Stitch the seam allowance.
Trim back to 5mm.
Repeat for the BACK EDGING and BACK pieces.
Fold the unstitched seam allowance of the BACK EDGING back onto itself.
Turn the BACK EDGING to the wrong side leaving 1cm edge visible on the RIGHT SIDE.
Repeat Step 2 & 3 for the FRONT.
Overlap the FRONT shoulder onto the BACK, meeting at the points marked on the pattern pieces.
Pin the overlapping seam allowances together.
Ease the SLEEVE into the bodice armscye.
Pin in place then stitch to secure the SLEEVE and the overlapping FRONT and BACK pieces.
Trim and finish the seam allowance using zig-zag stitch or an overlocking stitch.
Fold the CUFF in half and ease onto the SLEEVE.
Pin, stitch and finish the seam allowance.
Turn the garment WRONG SIDES out.
Align the FRONT and BACK and SLEEVE seam allowances.
Pin, stitch and finish as before.
Complete the hem baby folding the raw edge under 7.5mm twice creating a rolled hem. Top-stitch using zig-zag stitch.