杰西卡早产儿嘅臊虾仔 / 儿童唔够衫PDF车衫模式 24-36 周

£ 3.91

Clear

描述

Especially made for very tiny babies, the Jessica Sleepsuit has plenty of room to move in and can be worn over other clothes.

Can also be created for toys and dolls.

Featuring an asymmetric opening which reaches from the neckline to the foot, the sleep suit is easy to get on and off.

Can be made with or without a hood and with or without feet. There are two patterns, one for a short foot (3-5cm) and one for a longer foot (6-8cm).

Sizes available in this pattern are: 24-36 周 + gestational age

Additional information

Sizes

Preemie baby 24-36 周, 0-2 年

購買模式好易!

  • 单击 "添加到購物車" 按鈕, 將產品添加到購物車中
  • 喺結賬時輸入你嘅詳細信息
  • 點擊 "繼續到貝寶" 按鈕
  • 登錄您的 paypal 賬戶或選擇以客人身份埋單
  • 使用首選方法進行付款
  • 做!

付款完成之後, 通常只需要幾秒鐘, 你會被重定向回 tailoress®, 喺呢度你可以喺我個帳戶中查看您的訂單 (如果你已經有一個或選擇創建一個系找數). 你仲可以喺你嘅帳戶區域下載文件. 付款後, 你仲會收到一封電子郵件通知, 畀你知你嘅訂單詳細信息後不久, 另一封電子郵件包含您的下載連結.

paypal 係一種安全同穩陣嘅互聯網購買方法. 你不需要由 tailoress®購買 paypal 帳戶.

The Tailoress PDF Sewing Patterns - Jessica Preemie Baby / Children Sleep suit PDF Sewing Pattern 24-36 weeks

The Tailoress PDF Sewing Patterns - Jessica Preemie Baby / Children Sleep suit PDF Sewing Pattern 24-36 weeks

模式系一个全面嘅影印铺嘅PDF档案可以打印喺任何尺寸嘅纸张使用Adobe Reader嘅海报打印. 都可破碎到A4页. 单独嘅A4页有页码同识认嚟帮助你较正确后打印嘅每一页.

唔该检视 打印指令 要操出点准确噉打印出你图案嚟缩放.

影印铺头佢: 75cm x 60cm
A4页: 12

美國信函: 12

唔该注意,所有模式下载都系英文嘅, 但是, 您可以通過单击選擇首選語言嚟查看您所選語言嘅教程。 “翻译” at the top right of any page and selecting your preferred language from the drop down menu.

Jessica Preemie Romper Tutorial
The Tailoress PDF Sewing Patterns - Jessica Preemie Romper Tutorial

The Tailoress PDF Sewing Patterns - Jessica Preemie Romper Tutorial

The Tailoress PDF Sewing Patterns - Jessica Preemie Romper Tutorial

Note: If you are printing the pattern split onto A4 pages, first arrange the pages and stick together to ensure you match the correct pieces together.

Choose to cut either one set of HOOD pieces or two (to have a lining).

Lay two HOOD pieces RIGHT SIDES together. Pin and stitch the center back seam allowance. Trim and finish the seam allowance with zig-zag stitch or an overlocking stitch.

If you are using only one set of HOOD pieces, fold the front opening seam allowance back 75mm then again 75mm. Pin and stitch in place to finish the seam.

If you are using two sets of HOOD pieces to create a lining, place one set inside the other RIGHT SIDES together. Pin and stitch the opening seam allowances. Trim and finish the seam allowance as before.

Lay the BACK pieces RIGHT SIDES together.

Pin and stitch the center back seam.

Trim and finish the seam allowance.

Lay the GUSSET RIGHT SIDES together with the back matching the balance marks.

針, 縫合和完成接缝余量.

Lay the FRONT and BACK pieces RIGHT SIDES together.

Pin and stitch the shoulder seam allowances.

Trim and finish the seam allowance.

Fold the SLEEVE CUFF in half lengthways. Lay RIGHT SIDES together with the SLEEVE edge.

針, 縫合和完成接缝余量.

With the FRONT and BACK opened up and RIGHT SIDE facing you, lay the SLEEVE RIGHT SIDES together along the armscye.

Match the shoulder seam point with the center of the SLEEVE head. Ease the rest around.

針, 縫合和完成接缝余量.

With the FRONT and BACK RIGHT SIDES together, match the side seams and SLEEVE seams together.

Pin and stitch from the SLEEVE CUFF to the LEG CUFF.

Trim and finish the seam allowance.

Without the FOOT:
If you are not using the FOOT apply the LEG CUFF:

Open up the leg. Apply the LEG CUFF as in Step 6.

When applying the LEG CUFF to the side with the opening, fold inside the end seam allowances of the CUFF to hide the raw edges.

Pin the BACK leg to the FRONT leg RIGHT SIDES together. Match the GUSSET up to the center FRONT, matching the balance points.

Fold the BUTTONSTAND in half lengthways RIGHT SIDES TOGETHER. Sew the end seam allowances. Clip and trim the seam allowance and turn RIGHT SIDES out.

Match the BUTTONSTAND, RIGHT SIDES together with the FRONT that has the leg opening. Don’t forget to start matching 1.5cm down from the neckline and 1.5cm up from the end of the leg (or above the LEG CUFF) to allow for the seam allowance.

Fold back to the WRONG SIDE the seam allowance of the FRONT with the GUSSET attached. Pin and topstitch approx. 1cm from the center front edge.

Use the BUTTONSTAND PLANNER to mark placements for the safety snaps or velcro. Apply as per instructions and ensure to use a fastening that is safe for babies.

If using the FOOT:
Lay the FOOT RIGHT SIDES together with the FRONT leg and BACK leg. Pin the seam allowances allowing the BACK to curve around the FOOT piece.

Ensure to fold seam allowances to the back to avoid distortion of the front side when turned RIGHT SIDES out.

For the side with the opening, fasten the snaps together and then pin the leg onto the FOOT.

Stitch and finish the seam allowances.

For the HOOD:
Pin the seam allowance of the HOOD RIGHT SIDES together with the neckline.

Stitch then trim and finish the seam allowances.

Without the HOOD:
Ease the NECKLINE CUFF around the neckline.

When applying the NECKLINE CUFF allow it to curve off at the center front so that it doesn’t end square.

Trim and finish the seam allowance. You may wish to top stitch around the neckline to secure the seam allowance.

The Tailoress PDF Sewing Patterns - Jessica Preemie Baby / Children Sleep suit PDF Sewing Pattern 24-36 weeks

The Tailoress PDF Sewing Patterns - Jessica Preemie Baby / Children Sleep suit PDF Sewing Pattern 24-36 weeks

The Tailoress PDF Sewing Patterns - Jessica Preemie Baby / Children Sleep suit PDF Sewing Pattern 24-36 weeks

The Tailoress PDF Sewing Patterns - Jessica Preemie Baby / Children Sleep suit PDF Sewing Pattern 24-36 weeks

回顾

宜家都冇评论.

得已帮衬应该产品嘅客户可能会留个审查.



泳装

检视我哋嘅泳装图案范围
Shares