STAP 1:
Knip al patroondele.
With the TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.
Mark and fold the pleats – making sure to mark with the side seams in the centre, steek en pers.
STAP 2:
Match each front pleat to its corresponding back pleat.
Sew across the join using a tight zig zag stitch.
STAP 3:
Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.
Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.
STAP 4:
Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.
Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.
STAP 5:
Lê LIMBAND 1 REGTERKANTE saam met LYFBAND 2. Werk die naattoelatings tot by die merkers vas. Vou en druk die LIMBAND in die lengte half in, gereed om aansoek te doen.
STAP 6:
Gather the waistline of the TOP to fit the WAISTBAND.
An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.
Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.
STAP 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin en steek. Klaar is met die naattoelating.
STAP 8:
Vou die DAS middeldeur oor sy lengte REGTERKANTE saam. Plaas 'n lengte tou tussenin. Werk oor die bokant vas om die tou aan die DAS vas te maak. Speld en stik die naattoelating vas. Trek die tou versigtig en draai die DAS REGTEKANTE uit.
As jy 'n lus draaier:
Vou die DAS in die lengte in die helfte en werk die naattoelating vas. Draai regte kante uit die gebruik van 'n naat Turner.
Voltooi die DAS deur dit te druk en die rou punte twee keer onder te draai en gebruik klein steke om vas te maak. Voeg in die lyfband te voltooi.
As jy 'n bindmiddel het, kan jy dit met sig-sagsteek gebruik om jou dasse te maak.