Valentine Style 1 tutoriaal

 

STAP 1:

Match two TOP pieces RIGHT SIDES together lining up the pleats.

Fold the pleats through both layers together and pin in place.

Pin and stitch the shoulder seam allowance. Press.

Repeat for the remaining two TOP pieces.

 

STAP 2:

Open up the TOP pieces RIGHT SIDE up.

Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.

 

STAP 3:

With the two TOP pieces RIGHT SIDES together, speld, stitch and finish the side seam allowance.

Repeat for the other two TOP pieces.

 

STAP 4:

Lê LIMBAND 1 REGTERKANTE saam met LYFBAND 2. Werk die naattoelatings tot by die merkers vas. Vou en druk die LIMBAND in die lengte half in, gereed om aansoek te doen.

 

STAP 5:

Follow the tutorial for the skirt or trousers if you are wanting to make the dress or jumpsuit.

Match the waistlines of the TOP pieces together. Alternate how you overlap them, so if the lefthand front piece is in front of the righthand front piece, the lefthand back piece is behind the righthand back piece.

TOP
Match the centre front and back of the TOP to the WAISTBAND. Pin en steek in plek. Finish the seam allowance and press.

DRESS/JUMPSUIT
Reël die TOP afdelings regte kante teen mekaar met die broek en lyfband. Match side seams and centre front and back points.

Pin en steek in plek. Finish the seam allowance and press.

 

STAP 6:

Vou die DAS middeldeur oor sy lengte REGTERKANTE saam. Plaas 'n lengte tou tussenin. Werk oor die bokant vas om die tou aan die DAS vas te maak. Speld en stik die naattoelating vas. Trek die tou versigtig en draai die DAS REGTEKANTE uit.

As jy 'n lus draaier:
Vou die DAS in die lengte in die helfte en werk die naattoelating vas. Draai regte kante uit die gebruik van 'n naat Turner.

Voltooi die DAS deur dit te druk en die rou punte twee keer onder te draai en gebruik klein steke om vas te maak. Voeg in die lyfband te voltooi.

As jy 'n bindmiddel het, kan jy dit met sig-sagsteek gebruik om jou dasse te maak.