АҘЫМ 1:
Suitable for fleece/jersey/towelling fabric
Turn the SLEEVE cuff back 1.5cm to the RIGHT SIDE, then fold it again back on itself 3cm.
Top stitch close to the edge on the RIGHT SIDE.
АҘЫМ 2:
Match the back SLEEVE armhole with the BACK, УҢ ЯҠТАР бергә.
Булавка һәм тегеү. Finish with either an overlocker or zig-zag stitch. Trim the seam allowance.
АҘЫМ 3:
Match the FRONT armhole with the front SLEEVE, УҢ ЯҠТАР бергә.
Төйрәүес, stitch and finish as before.
Аҙымдарҙы ҡабатлау 1-2 икенсе пройма өсөн.
АҘЫМ 4:
Lay the FRONT RIGHT SIDES together with the BACK, matching the side seam and SLEEVE seam allowances.
Төйрәүес, тегеү һәм тамамлау.
Клип тиерлек тиклем шов пособие подмышечный нөктәһендә рөхсәт кейем тигеҙ ятыу өсөн бер тапҡыр әйләндереп .. Әгәр һеҙ тамамлаған шов пособие яҡын тән был кәрәк булмауы мөмкин
АҘЫМ 5:
Finish the garment hemline using your preferred finishing method.
Turn the hemline towards the WRONG SIDE 1.5cm.
Topstitch to secure.
АҘЫМ 6:
Fold the length of the COLLAR in half RIGHT SIDES together.
Pin and stitch the two shorter ends. Clip the corners and trim down to 5mm.
Turn RIGHT SIDES out.
АҘЫМ 7:
Match the raw edges of the COLLAR around the garment opening.
Төйрәүес, тегеү һәм тамамлау.
Top stitch close to the seam from the RIGHT SIDE to secure the seam allowance flat.
АҘЫМ 8:
Lay the two WAISTBAND pieces RIGHT SIDES together.
Pin and stitch all around leaving a gap of approximately 10cm to turn right sides out.
Turn RIGHT SIDES out and press seams flat. Top stitch around the edges to hold flat and seal the 10cm opening.
Apply a piece of velcro to either side of the WAISTBAND at the ends, approximately 5cm long.
АҘЫМ 9:
Align the WAISTBAND with the underarm points.
Top stitch through the WAISTBAND and BACK to secure in place.