КРОК 1:
Suitable for fleece/jersey/towelling fabric
Turn the SLEEVE cuff back 1.5cm to the RIGHT SIDE, then fold it again back on itself 3cm.
Top stitch close to the edge on the RIGHT SIDE.
КРОК 2:
Match the back SLEEVE armhole with the BACK, Правая бок разам.
Pin і шывок. Finish with either an overlocker or zig-zag stitch. абрэжце прыпуск.
КРОК 3:
Match the FRONT armhole with the front SLEEVE, Правая бок разам.
шпілька, шывок і скончыць, як і раней.
Repeat Steps 1-2 for the other armhole.
КРОК 4:
Закладзеце ПРЯНЫЯ ПРАЎНЫЯ СТОРЫ разам з НАЗАД, matching the side seam and SLEEVE seam allowances.
шпілька, шывок і скончыць.
Зашпіліце амаль да прыпуску на шво ў падпахавай кропцы, каб адзенне ляжала роўна пасля павароту. Калі вы скончылі прыпуск на швы блізка да цела, гэта можа не спатрэбіцца
КРОК 5:
Finish the garment hemline using your preferred finishing method.
Turn the hemline towards the WRONG SIDE 1.5cm.
Topstitch to secure.
КРОК 6:
Fold the length of the COLLAR in half RIGHT SIDES together.
Pin and stitch the two shorter ends. Clip the corners and trim down to 5mm.
Turn RIGHT SIDES out.
КРОК 7:
Match the raw edges of the COLLAR around the garment opening.
шпілька, шывок і скончыць.
Top stitch close to the seam from the RIGHT SIDE to secure the seam allowance flat.
КРОК 8:
Lay the two WAISTBAND pieces RIGHT SIDES together.
Pin and stitch all around leaving a gap of approximately 10cm to turn right sides out.
Turn RIGHT SIDES out and press seams flat. Top stitch around the edges to hold flat and seal the 10cm opening.
Apply a piece of velcro to either side of the WAISTBAND at the ends, approximately 5cm long.
КРОК 9:
Align the WAISTBAND with the underarm points.
Top stitch through the WAISTBAND and BACK to secure in place.