চার্লির সাঁতারের পোষাক টিউটোরিয়াল

Fold the TIE LOOPS piece in half along its length RIGHT SIDES together.

Stitch the seam allowance using zig-zag stitch.

Turn RIGHT SIDES out using a seam turner.

Cut into the TIE LOOPS into the 10 sections shown on the pattern piece.

Align the seam line to the inner centre and fold in half ready to insert.

একসঙ্গে সামনে ও পিছনে টুকরা ডান দিকের রাখা. Lay the GUSSET over the FRONT piece.

With the TIE LOOPS folded in half, insert them into the locations shown on the diagram, between the inner and outer FRONT and BACK pieces.

জায়গায় পিন.

Stitch using zig-zag stitch.

With the swimsuit still WRONG SIDES out, pin elastic around the seam allowances leaving the crotch seam open and also places where the TIE LOOPS are inserted, except on the centre front TIE LOOPS.

Stitch using zig-zag stitch.

Turn the swimsuit RIGHT SIDES out through the crotch and check the seams all look fine.

Turn WRONG SIDES out again and trim the seam allowances.

Fold the TIES in half along their length. Stitch using zig-zag stitch down their length.

Turn RIGHT SIDES out using a loop turner.

Fold the ends inside and secure with small fell stitches.

Turn the swimsuit RIGHT SIDES out.

Match the seam allowances at the crotch of the outer FRONT and BACK pieces.

Stitch using zig-zag stitch.

Fold the seam allowance of the BACK crotch inside and lay over the seam allowance of the FRONT crotch.

Use a ballpoint hand sewing needle and use small fell stitches to secure the seam.