Tagghiau fora tutti li muniti d 'arte.

Lay the FRONT RIGHT SIDES together with the BACK along the shoulder seam.

Pin and stitch in place.

Aduprà punto zig,-zag, o altri punto tretu longu stu pruggettu. assicurà dinù à utilizà un rulli di machine jersey, ballpoint.

Open up the garment with the RIGHT SIDES up.

Take the LEG CUFF piece and fold in half lengthways.

Ease the LEG CUFF to the armhole, distributing it evenly around. Pin è punto.

Finish the seam with an overlocker or zig zag stitch.

Repeat Steps 1 e 2 for the other armhole.

Cù u vistimentu lati sbagghiati o fora, match the side seam allowances ensuring to align the LEG CUFFS.

Pin and stitch the seam allowances on both sides. Finish the seam as before.

Without hood:
Take the HEM CUFF and NECKLINE CUFF and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.

Apply the HEM CUFF to the garment hem, RIGHT SIDES together.

Ease around evenly then pin and stitch in place.

Finish the seam allowance.

Skip this step if you are making this tee with a hood.

Repeat the process in Step 5 for the NECKLINE CUFF.

Directions for adding the HOOD:

Lay the HOOD pieces RIGHT SIDES together. Pin and stitch around the center back seam allowance.

Fold the HOOD CUFF in half along its length.

Ease it around the edge of the HOOD, RIGHT SIDES together.

Pin and stitch in place.

Finish the seam allowance.

Take the HOOD. Overlap CUFF sections onto each other.

Match center front and center back points of the HOOD to the FRONT and BACK sections. Do this by folding the garment in half and adding pins to mark the points. Repeat for the HOOD then match the pins together.

Pin and stitch in place.