Gabriella Jumpsuit Tutorial
[printfriendly]
Οι εικόνες είναι διαθέσιμες στην λήψη μοτίβο.
[wc_accordion collapse=”0″ leaveopen=”0″ τάξη=”” layout=”box”]
[wc_accordion_section title=”Step 1″]
1.5περιλαμβάνονται επίδομα cm ραφή
Κόψτε όλα τα κομμάτια μοτίβο.
Fold the TIE LOOPS in half as shown on the pattern piece. Stitch and cut along the CUTLINE.
Fold the WAISTBAND LOOP in half as shown on the pattern piece and stitch.
Turn the TIE LOOPS and WAISTBAND LOOP RIGHT SIDES OUT. Τύπος.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Τοποθετήστε την μπροστινή δεξιά πλευρά μαζί με το BACK.
Pin and stitch the side seam allowances.
Finish the seam allowance using zig-zags stitch or an overlocker.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Finish the underarm and neckline sections. Το παραπάνω διάγραμμα παρουσιάζει την μέθοδο χρησιμοποιώντας ένα προσαρμοσμένο κομμένα λωρίδα της μεροληψίας. Αν χρησιμοποιείτε έτοιμη προκατάληψη παρακαλούμε να προσαρμοστεί ώστε να ταιριάζει στο πλάτος προκαταλήψεις σας. For custom bias make yours approx. 4.5cm x 50cm long for the armholes and 4.5cm x 30cm long for the neckline seam allowances.
Pin τη λωρίδα μεροληψία στην θέση του κατά μήκος της μασχάλης ενότητα. Stitch επίδομα 1,5 εκατοστά ραφή.
Περικοπή το επίδομα ραφή σε περίπου 7,5 χιλιοστά.
Φορές πάνω από την εξωτερική ακμή της μεροληψίας από 1 εκατοστό.
Διπλώστε την ταινία προκατάληψη πάνω και γύρω από την ακατέργαστη ακμή για να κρύψει. Pin in place on the WRONG SIDE. Use a hand stitch such as slip stitch to secure the bias in place or topstitch close to the seam line.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
Fold the TIE LOOPS in half and align the raw edges with the unfinished shoulders of the garment.
Pin και βελονιά. Top-stitch the seam allowances flat.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
Take FRONT and BACK TROUSER pieces and lay RIGHT SIDES together.
Καρφίτσα, βελονιά και να τελειώσει τις αποζημιώσεις πλευρική ραφή.
Επαναλάβετε για την άλλη πλευρά.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Insert one TROUSER into another, Δεξιά πλευρά μαζί.
Align the crotch seam allowance.
Καρφίτσα, stitch and finish beginning at either centre front or back and continuing to the opposite center.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Take the TROUSER CUFFS and ELASTIC WAISTBAND.
Fold in half lengthways and sew the seam allowances.
Στρίψτε δεξιά πλευρά έξω.
Prepare the lengths of elastic by overlapping the seam allowances and stitching to create rounds.
[/wc_accordion_section]
[wc_accordion_section title=”Step 8″]
Fold the CUFFS in half so as to match the raw edges.
Insert the cuff elastic between the fabric layers, concealing it.
Align the raw edges of the CUFF to the end of the TROUSER leg. Pin και βελονιά στη θέση του. Finish the seam allowance as before.
Repeat for the opposite leg.
[/wc_accordion_section]
[wc_accordion_section title=”Step 9″]
Fold the ELASTIC WAISTBAND in half, ταιριάζουν με τις πρώτες άκρες.
Insert the waistband elastic between the layers.
Pin and stitch the ELASTIC WAISTBAND RIGHT SIDES together with the TROUSER waistline.
Stitch within the seam allowance to allow this row of stitches to be hidden once the FRONT and BACK are sewn on.
[/wc_accordion_section]
[wc_accordion_section title=”Step 10″]
Turn the FRONT and BACK WRONG SIDES out.
Match the waistline to that of the TROUSER and ELASTIC WAISTBAND.
Fold the WAISTBAND LOOP in half and insert the raw edges into the seam allowance between the upper garment and the TROUSER at one of the side seams. (Choose the opposite side to that which you want your tie to hang).
Καρφίτσα, βελονιά και να τελειώσει το επίδομα ραφή.
[/wc_accordion_section]
[wc_accordion_section title=”Step 11″]
Fold the WAISTBAND in half along its width RIGHT SIDES together. Sew the seam allowance, sew one end closed but leave one open.
Turn the WAISTBAND RIGHT SIDES out through the open end.
Fold back the seam allowance of the open end and sew closed using a small hand stitch such as whip stitch.
Complete the garment by creating the TIES (follow the TIE & STRAP TUTORIAL) and inserting into the TIE LOOPS.
[/wc_accordion_section]
[/wc_accordion]
Download the Gabriella Jumpsuit PDF Sewing Pattern here