PAŜO 1:
Tranĉu la tutan skemon pecoj.
With the TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.
Mark and fold the pleats – making sure to mark with the side seams in the centre, stitch and press.
PAŜO 2:
Match each front pleat to its corresponding back pleat.
Sew across the join using a tight zig zag stitch.
PAŜO 3:
Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.
Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.
PAŜO 4:
Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.
Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.
PAŜO 5:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
PAŜO 6:
Gather the waistline of the TOP to fit the WAISTBAND.
An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.
Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.
PAŜO 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pinglo kaj kudro. Finu la kudro-permeson.
PAŜO 8:
Faldu la Kravaton en duono laŭ ĝia longo DEKSTRAJ FLANKON kune. Metu longon de ŝnuro intere. Kudri trans la supro por sekurigi la ŝnuron al la KRAVATTO. Pingu kaj kudri la kudran permeson. Zorge tiru la ŝnuron turnante la DEKSTRAJ FLANKOJN KIGON eksteren.
Se vi havas buklo turner:
Faldu la Kvaton en duono laŭlonge kaj kudri la kudran permeson. Turnu dekstraj flankoj eksteren uzante kudro turner.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Enmeti en la waistband por kompletigi.
Se vi havas ligilon, vi povas uzi ĝin per zig-zaga punkto por krei viajn kravatojn.