GET THE AMIR TEE PDF PATTERN HERE
SAMM 1:
Lay the FRONT RIGHT SIDES together with the BACK along the shoulder seam.
Pin ja õmblema koht.
Kasutage sakiline õmblema või muu venitada õmblema kogu selle projekti. Samuti tagada, et kasutada pastaka vorm masin nõel.
SAMM 2:
SKIP TO STEP 4 FOR SLEEVE
Open up the garment with the RIGHT SIDES up.
Take the LEG CUFF piece and fold in half lengthways.
Ease the LEG CUFF to the armhole, distributing it evenly around. Pin ja õmblema.
Finish the seam with an overlocker or zig zag stitch.
Korrake sammu 1 ja 2 for the other armhole.
SAMM 3:
Rõiva VALE POOLT välja, match the side seam allowances ensuring to align the LEG CUFFS.
Pin and stitch the seam allowances on both sides. Finish the seam as before.
SAMM 4:
Murra mansetid poole piki selle laius.
Lihtne peale muhvi otsast. Pin ja õmblema.
SAMM 5:
Avada ees ja taga paremal küljel poole.
Müüge SLEEVE paremal küljel koos esi- ja tagaküljel. Kinnita kaenlaaluse punktid küljeõmblused ja keskel SLEEVE pea õlgade punkti. Lihtne ülejäänud.
Stitch ja lõpetada õmblusvarusid kasutades siksakiline õmblema või overlocker.
SAMM 6:
Rõiva VALE POOLT välja, lay the FRONT and BACK RIGHT SIDES together.
nõel, õmblema, trim and finish from the SLEEVE CUFF to the hem along the side seam.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary.
SAMM 7:
Take the HEM CUFF and NECKLINE CUFF (refer to Step 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.
SAMM 8:
Apply the HEM CUFF to the garment hem, Paremal küljel kokku.
Ease around evenly then pin and stitch in place.
Valmis õmblusvarusid.
SAMM 9:
USING THE NECKLINE CUFF – SKIP TO STEP 10 FOR NECK WARMER, SAMM 13 FOR HOOD.
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Paremal küljel kokku.
Pin and stitch in place and finish the seam allowance.
SAMM 10:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
SAMM 11:
Sew the raw edges together.
SAMM 12:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin ja õmblema.
SAMM 13:
Müüge HOOD tükki paremal küljel kokku. Pin and stitch around the outside seam line.
SAMM 14:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
SAMM 15:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.