Joey Tee juhendaja
[printfriendly]
Pilte on saadaval muster alla.
[wc_accordion collapse=”0″ leaveopen=”0″ klass=”” paigutus =”kasti”]
[wc_accordion_section title=”Step 1″]
Lõika välja kõik tükid, mis tähistavad mis tahes tasakaalu või kerguse jälgi. Sellel rõival on mõistlik venitatavus, seetõttu on soovitatav kasutada siksakilist õmblust kõikjal, kus õmblus on ehitatud.
Asetage SLEEVE käeaugu esiserv FRONT käeaugu külge, Paremal küljel kokku.
Pin ja õmblema õmblusvarusid.
Repeat for the other FRONT side.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Lay the back SLEEVE armhole to the BACK armhole RIGHT SIDES together.
Pin ja õmblema õmblusvarusid.
Repeat for the other BACK side.
Finish all sleeve seam allowances using an overlocker or zig-zag stitch. Kärbi vajadusel.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Rõiva VALE POOLT välja, align the side seams and SLEEVE seams.
Pin and stitch continuously from SLEEVE cuff to the garment hem.
Finish the seam allowances as before.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
ILMA HOOD:
Murdke pooleks kaela CUFF paremal küljel kokku ja õmble lühike õmblusvarusid.
Murdke kaela CUFF pooleks nii, et toores servad vastama.
Lihtne ümber Rõivas kaelus. Pin ja õmblema koht.
For HOOD see Steps 5-7.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
kapuutsiga:
Lay two HOOD pieces RIGHT SIDES together. Pin and stitch the center back seam allowance. Trim and finish the seam allowance with zig-zag stitch or an overlocking stitch.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Complete the hood by folding the front opening seam allowance back 0.75mm then again 0.75mm. Pin and stitch in place to finish the seam.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Ease the neckline of the HOOD on to the garment neckline. Overlap the centre front edges of the HOOD by 1.5cm onto each other.
Pin ja õmblema. Valmis õmblusvarusid.
You may like to top-stitch the seam allowance flat towards the bottom of the garment.
[/wc_accordion_section]
[wc_accordion_section title=”Step 8″]
Täitke Rõivas hem ja mansetid viimistlus õmblusvarusid, siis hoiukohta 1.5cm ja top õmblemine kindlustada.
Vajutage kõik õmblused.
[/wc_accordion_section]
[/wc_accordion]