Valentine Style 1 Treening

 

SAMM 1:

Match two TOP pieces RIGHT SIDES together lining up the pleats.

Fold the pleats through both layers together and pin in place.

Pin and stitch the shoulder seam allowance. press.

Repeat for the remaining two TOP pieces.

 

SAMM 2:

Open up the TOP pieces RIGHT SIDE up.

Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.

 

SAMM 3:

With the two TOP pieces RIGHT SIDES together, pin, stitch and finish the side seam allowance.

Repeat for the other two TOP pieces.

 

SAMM 4:

Asetage VÖRI 1 PAREMAD KÜLJED koos Vöörihmaga 2. Õmble õmblusvarud kuni markeriteni. Pöörake Vöörihma kokku ja vajutage pikuti pooleks, kandideerimiseks valmis.

 

SAMM 5:

Follow the tutorial for the skirt or trousers if you are wanting to make the dress or jumpsuit.

Match the waistlines of the TOP pieces together. Alternate how you overlap them, so if the lefthand front piece is in front of the righthand front piece, the lefthand back piece is behind the righthand back piece.

TOP
Match the centre front and back of the TOP to the WAISTBAND. Pin ja õmblema koht. Finish the seam allowance and press.

DRESS/JUMPSUIT
Korraldada TOP lõigud paremal küljel koos püksid ja värvel. Match side seams and centre front and back points.

Pin ja õmblema koht. Finish the seam allowance and press.

 

SAMM 6:

Voldi lips pooleks selle pikkuses PAREMAD KÜLJED kokku. Asetage vahele nööri pikkus. Õmble ülemine osa, et kinnitada nöör TIE külge. Kinnitage ja õmblege õmblusvaru. Tõmmake nöör ettevaatlikult, keerates SIDE PAREMAD POOLED välja.

Kui teil on loop Turner:
Voldi TIE pikuti pooleks ja õmble õmblusvaru. Pöörake paremale poolele, kasutades õmbluse Turner.

Lõpetage TIE, vajutades sellele ja keerates toored otsad kaks korda alla ning kinnitamiseks kasutage väikseid õmblusi. Lisada värvel lõpule.

Kui teil on sideaine, saate seda sidemete loomiseks kasutada sik-sak õmblusega.