George Etxebizitza Cap PDF jostun Pattern

£ 4.03

Clear

Deskribapena

George Etxebizitza Cap PDF jostun Pattern

George Etxebizitza Cap PDF jostun Pattern

The George Flat Cap is a classic hat which is surprisingly straight forward to assemble. Create in any woven fabric, the sky’s the limit for what you could do with this pattern!

Mesedez ikusi George Flat Cap Hemen edo klik fitxa azpian, irekitzeko orri honetan.

Printing instructions can be found here

All patterns come as full scale documents to allow you to print on different sized pages as well as A4 and US Letter sized documents.

deskarga bakoitza kolore diagrama edo argazkiekin tutorial bat dator. Zure eredua deskarga dezakezu denbora kopuru mugagabea zuzenean zure kontu gunea edo zure deskarga email bidez bidalitako lotura zehatzak bidez. Save fitxategiak zuzenean zure ordenagailuan etorkizunean erabiltzeko to.

1.5cm seam hobari A eredua pieza guztietan sartzen da adierazi ezean.

Available sizes are below, head circumference is in brackets.

CHILD: jaioberri (38cm /15″) / 3-6m (45cm / 17.5″) / 6-12m (47cm / 18.5″) / toddler (50cm / 19.5″) / umea (53.5cm / 21″)

ADULT: txiki (56cm / 22″) / medium (58cm / 23″) / handiak (60cm / 23.5″) / extra large (62cm / 24,5″)


Esteka azkarrak:

Additional information

Hats

Adult (S/M/L/XL), Child (0-Tween)

eredu bat erostea erraza da!

  • Gehitu produktua zure saskian 'Saskira gehitu' botoia klikatzen
  • Idatzi zure informazio Checkout-en
  • Egin klik 'ARAUAK PayPal' botoia
  • Zure Paypal kontuan sartu edo aukeratu gonbidatu gisa Eskaera egin
  • Egin ordainketa hobetsia metodoa erabiliz
  • EGINDA!

zure ordainketa amaitu ondoren, segundo eta normalean hartzen gutxi batzuk bakarrik, you bideratuko da atzera Tailoress® non zure eskaera ikusi ahal izango duzu Nire kontua hasi (Dagoeneko izan badituzu, bat edo aukeratu bat hobaria sortu nahi). Zure kontuan inguruan batetik ere deskargatu dezakezu zure fitxategiak. ordainketa gainean ere izango duzu jasotzeko posta elektroniko bidezko jakinarazpena badakizu zure eskaera xehetasun gutxira zure deskargatzeko esteka dituen beste posta jarraian utzi.

Paypal Internet bidez erosteko metodo seguru eta segurua da. Zuk ez duzu Paypal kontu bat behar Tailoress® The erosi.

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

SaveSave

SaveSave

SaveSave

SaveSaveSaveSave

Eredua fullscale copyshop PDF dokumentua eta horrek edozein tamaina paper Adobe Reader erabiliz poster inprimatu inprimatuta daiteke gisa dator. Eskuragarri baita zatikatu A4 eta AEBetako gutuna kalera tamainako orrietan. orrietan bereizi The orri zenbakiak eta markatzaile orri bakoitzean behar bezala lerrokatu duzu inprimatzeko ondoren lagundu behar.

Mesedez ikusi Inprimaketa Argibideak jakiteko nola zehaztasunez inprimatu zure eredua eskalan.

NEWBORN: Copyshop tamaina: 47cm x 21cm / A4 orrialdeak: 3 / US gutuna: 3

3-6M: Copyshop tamaina: 49cm x 21cm / A4 orrialdeak: 3 / US gutuna: 3

6-12M: Copyshop tamaina: 54cm x 23cm / A4 orrialdeak: 3 / US gutuna: 3

TODDLER: Copyshop tamaina: 54cm x 23cm / A4 orrialdeak: 3 / US gutuna: 3

CHILD: Copyshop tamaina: 57cm x 23cm / A4 orrialdeak: 3 / US gutuna: 3

SMALL: Copyshop tamaina: 54cm x 30cm / A4 orrialdeak: 6 / US gutuna: 6

MEDIUM: Copyshop tamaina: 72cm x 23cm / A4 orrialdeak: 4 / US gutuna: 4

LARGE: Copyshop tamaina: 66cm x 26cm / A4 orrialdeak: 4 / US gutuna: 8

EXTRA LARGE: Copyshop tamaina: 72cm x 28 cm / A4 orrialdeak: 8 / US gutuna: 8

Mesedez, kontuan eredua deskarga guztiak ingelesez daude, Hala tutoretza hemen ikusi ahal izango duzu zure hizkuntza aukeratu zure hizkuntza hobetsia hautatzeko klik eginez arabera “ITZULI” Goiko edozein orriaren eskuinaldean eta zure hizkuntza hobetsia hautatzeko goitibeherako menuan.

George Flat Cap Tutorial

George Flat Cap Tutorial

The Tailoress PDF Sewing Patterns - George Flat Cap Tutorial

The Tailoress PDF Sewing Patterns - George Flat Cap Tutorial

 

Irudiak dira ereduarekin deskargatu eskuragarri.

5mm seam allowance included
Cut out all the pattern pieces. Mark points A, B and C on the TOP and SIDE pieces using tailor’s tack, chalk or a dressmaker’s pen.

You may like to use interfacing (iron on or sew in) to strengthen the outer fabric. Simply cut one interfacing piece for the TOP and SIDE and iron on before continuing to the next step or sew together in Step 2.

Please note this pattern uses only a 5mm seam allowance.

Match points A, B and C of the TOP RIGHT SIDES together with the corresponding points on the SIDE.

Pin and stitch the 5mm seam allowance.

Clip the curved edges of the seam allowance to allow it to lay flat. Turn RIGHT SIDES out and topstitch the seam allowance to the TOP following the seam allowance all around.

With WRONG SIDES out, fold the dart on the TOP together.

Pin and stitch.

Repeat Steps 1-3 for the lining.

Lay the two BRIM pieces RIGHT SIDES together. Pin and stitch the larger curve.

Turn RIGHT SIDES out and press.

Insert the plastic inner BRIM piece between the fabric.

With the BRIM INSERT inside the BRIM, ensure to pull the BRIM tight over it.

PIn in place then stitch close to the edge of the BRIM INSERT to secure in place.

Cut the petersham tape length:
Length = hat size in cms + 3 cm

Starting from the centre back seam line of the lining, pin the petersham tape around the main cap lining, leaving the 5mm seam allowance visible.

Fold 1cm of the tape under to neaten the edge when you complete the circle. Overlap the tape by 1cm.

Stitch the inner edge of the petersham tape to the lining.

Match the centre point of the BRIM to the centre front point (point B) of the main cap.

Pin and stitch the raw edge of the BRIM to the main cap.

Insert the lining WRONG SIDES together with the outer fabric of the cap.

Fold back the seam allowances so that they are hidden inside the cap behind the petersham tape.

Pin in place carefully, then stitch around the outer edge of the petersham tape directly to the main cap. You will need to pull back the upper part of the brim to avoid sewing through it. Sew only through the BRIM piece containing the BRIM INSERT and circumference of the cap.

Complete the cap by using small hand stitches to hold the TOP front of the cap to the BRIM. Approximately 15-20cms distributed around the centre front of the cap can be secured if desired.

Download the George Flat Cap PDF Sewing Pattern here

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

SaveSave

SaveSave

SaveSave

SaveSaveSaveSave

Reviews

Ez dago iritzirik daude oraindik.

Bakarrik duten produktu hau erosi berrikuspena utzi daiteke bezeroei oraindik.



Bainujantziak

Ikusi gure bainujantzia ereduak sorta
Ekimenak