Amir Tee & Jumper Tutorial

Amir Tee & Jumper Tutorial

The Tailoress PDF Sewing Patterns - Amir Tee & Jumper Tutorial

Ôfbyldings binne beskikber yn it patroan download.

READ THE PRINTING INSTRUCTIONS BEFORE PRINTING WWW.THE-TAILORESS.COM/PRINTING-INSTRUCTIONS
1.5sm naad fergoeding opnommen
Knip út alle patroan stikken.

Lizze de FORSTJOCHTSJOCHTEN tegearre mei de BACK lâns de skoudeream.

Pin en stek op plak.

Brûk zig-seach stitch of oare stretch stitch troch dit projekt. Ek soargje foar in balpen jersey machine needle.

SKIP TO STEP 4 FOR SLEEVE

Iepenje it klean mei de RJOCHTS SIDES omheech.

Nim it LEG CUFF-stik en fold yn heale lingtes.

Makket de LEG CUFF oan 'e earmholle, it evenredich ferdiele. Pin en stitch.

Finish de naad mei in overlocker of zig zag-stitch.

Stappen werhelje 1 en 2 foar de oare earmholte.

Mei it klean WRONG SIDES út, oerienkomme mei de fergoedingen oan 'e sydeam, en soargje derfoar dat de LEG CUFFS yn oerienstimming komt.

Pin en stik de seame fergoedingen oan beide kanten. Finje de naad lykas earder.

Fold the SLEEVE CUFF in half along its width.

Ease onto the end of the SLEEVE. Pin en stitch.

Open up the FRONT and BACK RIGHT SIDES towards you.

Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.

Stitch and finish the seam allowance using zig zag stitch or an overlocker.

Mei it klean WRONG SIDES út, lay the FRONT and BACK RIGHT SIDES together.

pin, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.

Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary.

Take the HEM CUFF and NECKLINE CUFF (refer to Step 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) and fold in half RIGHT SIDES together to create a continuous loop. Pin en stitch de koarte naad fergoedingen.

Tapasse e seamen cuff oan it kleed hem, RJOCHTS Sides tegearre.

Ease around gelijkmatig dan pin en stitch yn plak.

Ôf de naad fergoeding.

USING THE NECKLINE CUFFSKIP TO STEP 10 FOR NECK WARMER, STEP 13 FOR HOOD.

Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, RJOCHTS Sides tegearre.

Pin and stitch in place and finish the seam allowance.

USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.

 

Sew the raw edges together.

Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.

Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin en stitch.

Lei de kap stikken RJOCHTS kanten byinoar. Pin and stitch around the outside seam line.

 

Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.

 

Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.

Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.

Download the *PRODUCT NAME* PDF Sewing Pattern here

Shares