STEP 1:
Skip this step if you plan to not use the HOOD:
Lei de kap stikken RJOCHTS kanten byinoar. Pin en stitch om it sintrum werom naad fergoeding.
Ensure to use a ballpoint jersey machine needle.
STEP 2:
Take the HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.
If you are not adding the hood, repeat this step for the NECKLINE CUFF.
STEP 3:
Fold the SLEEVE CUFF in half along its width.
Ease onto the end of the SLEEVE. Pin en stitch.
STEP 4:
Repeat STEP 3 for the HOOD CUFF.
Skip this Step if you are not using the HOOD.
STEP 5:
Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.
Pin en stek op plak.
STEP 6:
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
STEP 7:
Mei it klean WRONG SIDES út, lay the FRONT and BACK RIGHT SIDES together.
pin, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.
STEP 8:
WITH HOOD:
Nim de kap. Oerlaapje cuff seksjes op elkoar.
Match sintrum front en sintrum werom punten fan de motorkap oan de foar- en efterkant Seksjes. Doch dit troch it optearen de klean yn heale en it tafoegjen fan pins te gelegenheid fan de punten. Werhelje foar de motorkap dan oerien mei de Pins tegearre.
Pin en stek op plak.
WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Pin en stek op plak.
STEP 9:
Apply the HEM CUFF by folding in half along the width and easing around the hemline. Pin en stek op plak.