Kylo Tee Tutorial

STEP 1:

1.5sm naad fergoeding opnommen
Knip út alle patroan stikken. The CUFFS will sew better if made from jersey.

Fold the LEG CUFFS in half lengthways. Match the raw edges of one with those of FRONT 1, RJOCHTS Sides tegearre.

Pin en stek op plak. Werhelje for FRONT 2.

Brûk zig-seach stitch of oare stretch stitch troch dit projekt. Ek soargje foar in balpen jersey machine needle.

STEP 2:

With FRONT 1 over FRONT 2 with both parts RIGHT SIDES up, align either end of the cuffs on FRONT 1 with the markers on FRONT 2.

Pin in place.

STEP 3:

Lay FRONT 1 & 2 RIGHT SIDES together with the BACK. Pin the side seam allowances together, removing the pins at the join of FRONT 1 & 2 and replacing to secure through all pieces.

Stitch in plak. Repeat for the opposite side.

STEP 4:

Take the HEM CUFF and NECKLINE CUFF (if using) and fold in half RIGHT SIDES together to create a continuous loop. Pin en stitch de koarte naad fergoedingen.

Skip to step 10 for neck warmer or step 13 for hood.

STEP 5:

Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, RJOCHTS Sides tegearre.

Pin and stitch in place and finish the seam allowance.

STEP 6:

Tapasse e seamen cuff oan it kleed hem, RJOCHTS Sides tegearre.

Ease around gelijkmatig dan pin en stitch yn plak.

Ôf de naad fergoeding.

STEP 7:

USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.

STEP 8:

Sew the raw edges together.

STEP 9:

Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.

Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin en stitch.

STEP 10:

Lei de kap stikken RJOCHTS kanten byinoar. Pin and stitch around the outside seam line.

STEP 11:

Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.

 

STEP 12:

Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.

Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.