CÉIM 1:
Gearr amach gach píosa patrún.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
CÉIM 2:
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
CÉIM 3:
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
CÉIM 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
CÉIM 5:
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin and stitch the seam allowance.
CÉIM 6:
Fill an carbhat ina dhá leath feadh a fhad TAOBH CEART le chéile. Cuir fad téad idir eatarthu. Fuáil trasna a bharr chun an sreang a dhaingniú don TIE. Pin agus sew an liúntas seam. Tarraing an téad go cúramach agus na TÁILLÍ CEART A cheangail amach.
Má tá lúb-iompaire agat:
Fill an TIE ina leath ar fad agus fuála an liúntas seam. Cas ar dheis ag úsáid Turner seam.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Insert into the WAISTBAND to complete.
Má tá ceangaltán ceanglóra agat is féidir leat é a úsáid le stitch zigzag chun do naisc a chruthú.
CÉIM 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Bioráin agus stitch. Finish the seam allowance.