Ghearradh a-mach a h-uile pàtran pìosan.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin and stitch the seam allowance.
Fold the TIE in half along its length RIGHT SIDES together. Place a length of string in-between. Sew across the top to secure the string to the TIE. Pin and sew the seam allowance. Carefully pull the string turning the TIE RIGHT SIDES out.
Ma tha lùb tuairnear:
Fold the TIE in half lengthways and sew the seam allowance. Tionndaidh gu deas taobh a mach a 'cleachdadh seam tuairnear.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Cuiribh a-steach an WAISTBAND a lìonadh.
If you have a binder attachment you can use it with zig-zag stitch to create your ties.
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin agus Stitch. Lìomh na seam cuibhreann.