Boné George estándar PDF costura

£ 4.03

Clear

descrición

Boné George estándar PDF costura

Boné George estándar PDF costura

The George Flat Cap is a classic hat which is surprisingly straight forward to assemble. Create in any woven fabric, the sky’s the limit for what you could do with this pattern!

Por favor, vexa o George Flat Cap here or click the tab below to open it in this page.

Printing instructions can be found here

All patterns come as full scale documents to allow you to print on different sized pages as well as A4 and US Letter sized documents.

Every download comes with a tutorial with colour diagrams or photographs. You can download your pattern an unlimited amount of time directly from your account area or via your specific download link sent via email. Save files directly to your computer for future use.

A 1.5cm seam allowance is included on all pattern pieces unless otherwise stated.

Available sizes are below, head circumference is in brackets.

CHILD: recentemente nado (38cm /15″) / 3-6m (45cm / 17.5″) / 6-12m (47cm / 18.5″) / neno (50cm / 19.5″) / neno (53.5cm / 21″)

ADULT: pequeno (56cm / 22″) / medio (58cm / 23″) / gran (60cm / 23.5″) / extra large (62cm / 24,5″)


Quick Links:

Additional information

sombreiros

Adult (S/M/L/XL), neno (0-Tween)

A compra dun estándar é fácil!

  • Engadir o produto ao seu carro, premendo no botón "engadir á cesta"
  • Informe os seus datos na Caixa
  • Prema no botón 'proceder ao PAYPAL' botón
  • Entre na súa conta Paypal ou optar por facer o checkout como convidado
  • Facer o pago mediante o método preferido
  • DONE!

Xa que o seu pagamento está completo, que normalmente leva só uns segundos, será redirixido ao seu Tailoress® onde podes ver o seu fin na miña conta (Se xa tivo un ou escolleu para crear un no check-out). A partir da súa área de conta que tamén pode descargar os seus arquivos. Tras o pago, tamén recibirá unha notificación por correo electrónico para que vostede sabe os detalles da solicitude pronto seguido por outro correo electrónico que contén a ligazón para descargar.

PayPal é un método seguro e seguro de mercar a través de Internet. Non precisa de unha conta Paypal para compra a partir do Tailoress®.

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

gardargardar

gardargardar

gardargardar

gardargardargardargardar

Estándar ven como un documento PDF Copyshop fullscale que pode ser impreso en calquera tamaño de papel usando o Adobe Reader para impresión do cartel. Also available broken up onto A4 and US Letter sized pages. The separate pages have page numbers and markers to help you align each page correctly after printing.

Por favor, vexa o Instrucións de impresión para descubrir como obter unha impresión exacta seu patrón para dimensionar.

NEWBORN: tamaño Copyshop: 47cm x 21cm / A4 Pages: 3 / US Letter: 3

3-6M: tamaño Copyshop: 49cm x 21cm / A4 Pages: 3 / US Letter: 3

6-12M: tamaño Copyshop: 54cm x 23cm / A4 Pages: 3 / US Letter: 3

TODDLER: tamaño Copyshop: 54cm x 23cm / A4 Pages: 3 / US Letter: 3

CHILD: tamaño Copyshop: 57cm x 23cm / A4 Pages: 3 / US Letter: 3

SMALL: tamaño Copyshop: 54cm x 30cm / A4 Pages: 6 / US Letter: 6

MEDIUM: tamaño Copyshop: 72cm x 23cm / A4 Pages: 4 / US Letter: 4

LARGE: tamaño Copyshop: 66cm x 26cm / A4 Pages: 4 / US Letter: 8

EXTRA LARGE: tamaño Copyshop: 72cm x 28cm / A4 Pages: 8 / US Letter: 8

Teña en conta que todas as descargas estándar son en inglés, porén pode ver o tutorial aquí no idioma seleccionado ao seleccionar o seu idioma preferido premendo “Traducir” na esquina superior dereita da páxina e seleccionar o seu idioma preferido desde o menú desplegable.

George Flat Cap Tutorial

George Flat Cap Tutorial

The Tailoress PDF Sewing Patterns - George Flat Cap Tutorial

The Tailoress PDF Sewing Patterns - George Flat Cap Tutorial

 

Images are available in the pattern download.

5mm seam allowance included
Cut out all the pattern pieces. Mark points A, B and C on the TOP and SIDE pieces using tailor’s tack, chalk or a dressmaker’s pen.

You may like to use interfacing (iron on or sew in) to strengthen the outer fabric. Simply cut one interfacing piece for the TOP and SIDE and iron on before continuing to the next step or sew together in Step 2.

Please note this pattern uses only a 5mm seam allowance.

Match points A, B and C of the TOP RIGHT SIDES together with the corresponding points on the SIDE.

Pin and stitch the 5mm seam allowance.

Clip the curved edges of the seam allowance to allow it to lay flat. Turn RIGHT SIDES out and topstitch the seam allowance to the TOP following the seam allowance all around.

With WRONG SIDES out, fold the dart on the TOP together.

Pin and stitch.

Repeat Steps 1-3 for the lining.

Lay the two BRIM pieces RIGHT SIDES together. Pin and stitch the larger curve.

Turn RIGHT SIDES out and press.

Insert the plastic inner BRIM piece between the fabric.

With the BRIM INSERT inside the BRIM, ensure to pull the BRIM tight over it.

PIn in place then stitch close to the edge of the BRIM INSERT to secure in place.

Cut the petersham tape length:
Length = hat size in cms + 3 cm

Starting from the centre back seam line of the lining, pin the petersham tape around the main cap lining, leaving the 5mm seam allowance visible.

Fold 1cm of the tape under to neaten the edge when you complete the circle. Overlap the tape by 1cm.

Stitch the inner edge of the petersham tape to the lining.

Match the centre point of the BRIM to the centre front point (point B) of the main cap.

Pin and stitch the raw edge of the BRIM to the main cap.

Insert the lining WRONG SIDES together with the outer fabric of the cap.

Fold back the seam allowances so that they are hidden inside the cap behind the petersham tape.

Pin in place carefully, then stitch around the outer edge of the petersham tape directly to the main cap. You will need to pull back the upper part of the brim to avoid sewing through it. Sew only through the BRIM piece containing the BRIM INSERT and circumference of the cap.

Complete the cap by using small hand stitches to hold the TOP front of the cap to the BRIM. Approximately 15-20cms distributed around the centre front of the cap can be secured if desired.

Download the George Flat Cap PDF Sewing Pattern here

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - George Flat Cap PDF Sewing Pattern

gardargardar

gardargardar

gardargardar

gardargardargardargardar

comentarios

Non hai comentarios aínda.

Só sesión clientes que mercaron este produto pode deixar un comentario.



roupa de baño

Ver a nosa gama de modelos de maio
accións