GET THE AMIR TEE PDF PATTERN HERE
Taka 1:
Sa da gaban RIGHT bangarorin tare da BACK tare da kafada kabu.
Fil kuma dinka a wurin.
Yi amfani da Zig-ZAG dinka ko wasu stretch dinka cikin wannan shiri. Kuma a tabbatar da yin amfani da wani ballpoint mai zane inji allura.
Taka 2:
SKIP TO STEP 4 FOR SLEEVE
Bude up tufar da RIGHT bangarorin up.
Take kafar Cuff yanki da kuma ninka a cikin rabin lengthways.
'Yanci da kafa cuff da armhole, rarraba shi ko'ina kewaye da. Fil kuma dinka.
Gama da kabu tare da wani overlocker ko Zig ZAG dinka.
maimaita taku 1 da kuma 2 ga sauran armhole.
Taka 3:
Tare da tufar ba daidai bangarorin fita, dace da gefen kabu alawus tabbatar da tsara a layi da kafar cuffs.
Pin da dinka da kabu alawus a garesu. Gama da kabu kamar yadda kafin.
Taka 4:
Ninka cuff cuff a cikin rabin gefen.
Ease onto the end of the SLEEVE. Fil kuma dinka.
Taka 5:
Open up the FRONT and BACK RIGHT SIDES towards you.
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
Taka 6:
Tare da tufar ba daidai bangarorin fita, lay the FRONT and BACK RIGHT SIDES together.
fil, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.
Clip kusan har zuwa Haske na Seam a matakin da ake sani don ba da izinin suturar don sa lebur da zarar ya juya. Idan ka gama ba da izinin haya kusa da jikin wannan bazai zama dole ba.
Taka 7:
Dauki hemf da abun wuya cuff (koma zuwa mataki 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) da ninka cikin rabin bangarorin dama don ƙirƙirar madauki. PIN da dinka da gajeren kabu alawus.
Taka 8:
Aiwatar da kalmasa cuff da tufa kalmasa, RIGHT bangarorin tare.
'Yanci a ko'ina sa'an nan nashi da kuma dinka a wurin.
Gama da kabu allowance.
Taka 9:
USING THE NECKLINE CUFF – SKIP TO STEP 10 FOR NECK WARMER, Taka 13 FOR HOOD.
Fold the NECKLINE CUFF in half matching the raw edges. Sauƙaƙa wuya abun wuya cuff a kusa da budewar wuya, RIGHT bangarorin tare.
Fil da kutse a wuri da gama Seam.
Taka 10:
USING THE NECK WARMER
Ninka da wuya warmo cuff a cikin rabin tare da tsakiyar layi.
Taka 11:
Dinka rawanin tare.
Taka 12:
Latsa Buƙatar Buƙatar Kyauta. Ninka da wuya Warfer Cuff baya kan kan ɓoye na Seam.
Nemo cibiyar gaba da cibiyar baya wurare a kan wuya da kuma babban abin wuya. Dace da raw gefuna na wuyan wuyan wuyan wanki. Fil kuma dinka.
Taka 13:
Sa da kaho guda RIGHT bangarorin tare. Fil da sanda a kusa da layin waje.
Taka 14:
Aauki Hood Cuff, ninka shi a cikin rabin dacewa da mafi tsayi na SOAM. Fil da sanda a cikin rufin hood.
Taka 15:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Aiwatar da tsakiyar hood cuff zuwa tsakiyar gaban tufafin.
Dace da tsakiyar baya na hood tare da tsakiyar tufafin. PIN da kuma.