STEP 1:
Skip this step if you plan to not use the HOOD:
Sa da kaho guda RIGHT bangarorin tare. Fil kuma dinka a kusa da cibiyar da baya kabu allowance.
Ensure to use a ballpoint jersey machine needle.
STEP 2:
Take the HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.
If you are not adding the hood, repeat this step for the NECKLINE CUFF.
STEP 3:
Fold the SLEEVE CUFF in half along its width.
Ease onto the end of the SLEEVE. Fil kuma dinka.
STEP 4:
Repeat STEP 3 for the HOOD CUFF.
Skip this Step if you are not using the HOOD.
STEP 5:
Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.
Fil kuma dinka a wurin.
STEP 6:
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
STEP 7:
Tare da tufar ba daidai bangarorin fita, lay the FRONT and BACK RIGHT SIDES together.
fil, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.
STEP 8:
WITH HOOD:
Dauki kaho. Zoba Cuff sassan uwa juna.
Match cibiyar gaba da kuma tsakiyar baya da maki daga cikin kaho zuwa gaban da BACK sassan. Shin wannan da nadawa da tufa a rabin da kuma kara fil don alama da maki. Maimaita ga kaho sa'an nan dace da dari tare.
Fil kuma dinka a wurin.
WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Fil kuma dinka a wurin.
STEP 9:
Apply the HEM CUFF by folding in half along the width and easing around the hemline. Fil kuma dinka a wurin.