Taka 1:
Da fatan za a karanta umarnin bugu!
Ƙirƙiri aljihunan welt akan guntun GABA. Follow the welt pocket tutorial included or find it here: https://www.the-tailoress.com/product/welt-pockets-pdf-sewing-pattern/
Taka 2:
Tare da TIES WRONG SIDES sama, ninka baya 1cm na ƙarshen ɗaya. Ninka baya 5mm tare da tsayin bangarorin biyu kuma latsa. Sa'an nan kuma ninka TIE a cikin rabi tare da ɓoye danyen gefuna da aka juya a baya. Stitch in place.
Ƙarshen ɗaya zai kasance ɗanyen baki, za a dinka wannan a cikin gefen rigar.
Taka 3:
Ninka BANGAREN KWALLIYA tare da tsayi. dinka alawus din dinkin kasa tare. Yanke kusurwar kuma a datse alawus ɗin ɗinki. Juya RIGHT SIDES fita kuma latsa.
Taka 4:
Sa da gaban da BACK RIGHT bangarorin tare. Pin da dinke alawus din dinkin kafada.
Maimaita daya gefen.
Taka 5:
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK pieces. Matching the underarm points.
Pin and stitch the seam allowance between the underarm points.
Danna kabu a bude. Repeat for the other SLEEVE.
Taka 6:
Tare da tufar ba daidai bangarorin fita, match the SLEEVE seam allowances and the side seams of the FRONT and BACK.
Insert the TIE at the tie insertion point of the side seam on one side. Insert it between the FRONT and BACK so that it is visible on the RIGHT SIDE of the garment once sewn.
Pin and stitch the SLEEVE from the underarm point at the sleeve opening, around the curve to the lowest inside point of the SLEEVE. Finish the seam allowances by clipping the curved edge and trimming to 7mm.
Pin and stitch the side seam from the underarm point to the hemline. Turn RIGHT SIDES out and press the seams allowances.
Taka 7:
With the RIGHT SIDES out, pin the COLLAR around the centre front and neckline of the FRONT and BACK.
Pin the remaining TIE at the tie insertion point on the opposite side to where the side seam TIE is placed, on the centre FRONT.
Stitch just within the seam allowance.
Taka 8:
Follow Steps 4-6 to create the lining, ignoring references to the TIES and there’s no need to clip the SLEEVE seam allowance.
Taka 9:
Arrange the lining RIGHT SIDES together with the main garment. Pin and stitch around the centre front opening, including the COLLAR.
Stitch in place.
Juya RIGHT SIDES fita kuma latsa.
Taka 10:
Turn back the seam allowances of the SLEEVE at both openings. Secure with small hand stitches. Press.
Turn up the main garment hemline 1 inch / 2.5cms and press. Turn up the lining hemline the same amount and pin. Sew together using hem stitch.