Taka 1:
Cut out all pattern pieces.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Taka 2:
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
Taka 3:
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
Taka 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
Taka 5:
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin and stitch the seam allowance.
Taka 6:
Ninka ƙuƙumar cikin rabi tare da tsawonsa RIGHT SIDES tare. Place a length of string in-between. Dinka a saman sama don tabbatar da kirtani zuwa TIE. Pin and sew the seam allowance. A hankali zare igiyar tana juya TIE RIGHT SIDES waje.
If you have a loop turner:
Ninka TIE a cikin rabin tsayi kuma dinka izinin dinki. Turn RIGHT SIDES out using a seam turner.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Insert into the WAISTBAND to complete.
Idan kuna da abin da aka makala za ku iya amfani da shi tare da dinkin zigzag don ƙirƙirar alakar ku.
Taka 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Fil kuma dinka. Gama da kabu allowance.