Gabriella Jumpsuit PDF Nails kumu

£ 5.98

'ē aʻe: ,

hō'ikeʻano

Gabriella Jumpsuit PDF Nails kumu

The Gabriella Jumpsuit is a loose fit, full length jumpsuit featuring shoulder straps and a side tie that sits on the hips. The trouser hems are elasticated as well as the waistline to create the gathers.

This jumpsuit should ideally be made using a woven fabric like cotton lawn or voile

Available i ka nui like 'ole: 4 / 6 / 8 / 10 / 12 / 14 / 16 / 18

E nānā i ka GABRIELLA TUTORIAL ʻaneʻi.

pai kuhikuhi hiki ke loaʻa 'aneʻi.

All lauana e hele mai i piha me ka unahiʻole nā ​​palapala e ae oe e kakau i kekahi pepa paiaʻaoʻao like hoʻi me A4 a me US ka huapalapala mua pepa paia palapala.

Kela a me keia Download ke hele mai me ka hōʻike aʻo me ka waihoʻoluʻu mau kiʻikuhi a kiʻi. You can download your pattern an unlimited amount of time directly from your account area or via your specific download link sent via email. Save files directly to your computer for future use.

A 1.5cm ulana wahi ua komo ma luna o nā mea a pau kumu apana koe ke olelo.


hoopoina koke ana Loulou:

Ke kūʻaiʻana i ke kumu, he mama!

  • Pākuʻi i ka huina hoonui i kou kaa ma ke kaomi 'o ka' Pākuʻi i kaʻa 'ana i ke pihi
  • E komo ae i kou lāliʻi i loko o ka a Kūʻai
  • Kaomi i ka 'ke hoomaka nei e PayPal' pihi
  • ʻeʻe i kou PayPal mooolelo a koho e a Kūʻai like me ka malihini
  • E ka uku ka hoʻohana 'ana i kou mau pahuhopu i iaoia
  • hana aku ai!

Once kou uku ka piha, a maʻamau a lawe wale i kekahi mau kekona, oe e e o kekah hoʻi i ka Tailoress® wahi oe e nānā i kāu mea i loko o kaʻu moʻokāki (ina oe ua loaa ia i kekahi a koho, e hana i kekahi ma a Kūʻai). Mai kou hoike āpana 'oe hiki i download Ke i kou AEIU. Ma ka uku oe e hoi loaa ka leka uila e hōʻike e e oe i kou mea lāliʻi koke ukali ia e kekahi leka uila i loaʻa i kou Download loulou.

PayPal mea he palekana a me ka makau ole iaoia o ke kūʻaiʻana ma luna o ka punaewele. Oe e ole e pono ai i ka PayPal bila e kūʻai mai Ka Tailoress®.

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

SaveSave

SaveSave

SaveSave

SaveSaveSaveSave

Kumu hele mai ana me ka fullscale copyshop PDF palapala i hiki ke pai ia ma luna o kekahi nui ka pepa me ka hoʻohana 'Adobe Reader i ka pelaha Print. Kekahi i loaʻa wāwahi i ma A4 a me US ka huapalapala mua pepa paia i nā palapala i. Ke hoʻokaʻawaleʻaoʻao i 'aoʻao nui a me nā hōʻailona, ​​e kōkuaʻoe align kēlā me kēia' aoʻao pono ma hope o ka paʻi palapala.

E nānā i ka pai Na Ke Kumu e imi mai ana i ka pololei e kakau i kou kumu e ka pālākiō o.

TOP: Copyshop nui: 70cm x 62cm / A4 Pages: 12 / US ka huapalapala mua: 12

TROUSERS: Copyshop nui: 59cm x 199cm / A4 Pages: 24 / US ka huapalapala mua: 24

WAISTBAND & CUFF: Copyshop nui: 18.5cm X 130cm / A4 Pages: 5 / US ka huapalapala mua: 6

Eʻoluʻolu, e hoailona oukou i ka mea a pau kumu download i loko o English, nae oe e nānā i ka hōʻike aʻo iʻaneʻi i loko o kou wae 'ōlelo ma ke kohoʻana i kou mau pahuhopu i ka' ōlelo ma ke kaomi ' “unuhi” ma ka luna pono o kekahi 'aoʻao a me ke kohoʻana i kou mau pahuhopu i ka' ōlelo, mai ke kulu iho kuhikuhi kahua paʻa.

Gabriella Jumpsuit Tutorial

Gabriella Jumpsuit Tutorial

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit Tutorial

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit Tutorial

Images i loaʻa i loko o ke kumu Download.

1.5cm seam allowance included
Cut out all the pattern pieces.

Fold the TIE LOOPS in half as shown on the pattern piece. Stitch and cut along the CUTLINE.

Fold the WAISTBAND LOOP in half as shown on the pattern piece and stitch.

Turn the TIE LOOPS and WAISTBAND LOOP RIGHT SIDES OUT. Press.

Lay the FRONT RIGHT SIDES together with the BACK.

Pin and stitch the side seam allowances.

Finish the seam allowance using zig-zags stitch or an overlocker.

Finish the underarm and neckline sections. The above diagram shows the method of using a custom cut strip of bias. If you are using prepared bias please adapt to suit your bias width. For custom bias make yours approx. 4.5cm x 50cm long for the armholes and 4.5cm x 30cm long for the neckline seam allowances.

Pin the bias strip in place along the underarm section. Stitch a 1.5cm seam allowance.
Trim the seam allowance to about 7.5mm.
Fold over the outer edge of the bias by 1cm.
Fold the bias strip over and around the raw edge to conceal. Pin in place on the WRONG SIDE. Use a hand stitch such as slip stitch to secure the bias in place or topstitch close to the seam line.

Fold the TIE LOOPS in half and align the raw edges with the unfinished shoulders of the garment.

Pin and stitch. Top-stitch the seam allowances flat.

Take FRONT and BACK TROUSER pieces and lay RIGHT SIDES together.

Pin, stitch and finish the side seam allowances.

Repeat for the other side.

Insert one TROUSER into another, RIGHT SIDES together.

Align the crotch seam allowance.

Pin, stitch and finish beginning at either centre front or back and continuing to the opposite center.

Take the TROUSER CUFFS and ELASTIC WAISTBAND.

Fold in half lengthways and sew the seam allowances.

Turn RIGHT SIDES out.

Prepare the lengths of elastic by overlapping the seam allowances and stitching to create rounds.

Fold the CUFFS in half so as to match the raw edges.

Insert the cuff elastic between the fabric layers, concealing it.

Align the raw edges of the CUFF to the end of the TROUSER leg. Pin and stitch in place. Finish the seam allowance as before.

Repeat for the opposite leg.

Fold the ELASTIC WAISTBAND in half, matching the raw edges.

Insert the waistband elastic between the layers.

Pin and stitch the ELASTIC WAISTBAND RIGHT SIDES together with the TROUSER waistline.

Stitch within the seam allowance to allow this row of stitches to be hidden once the FRONT and BACK are sewn on.

Turn the FRONT and BACK WRONG SIDES out.

Match the waistline to that of the TROUSER and ELASTIC WAISTBAND.

Fold the WAISTBAND LOOP in half and insert the raw edges into the seam allowance between the upper garment and the TROUSER at one of the side seams. (Choose the opposite side to that which you want your tie to hang).

Pin, stitch and finish the seam allowance.

Fold the WAISTBAND in half along its width RIGHT SIDES together. Sew the seam allowance, sew one end closed but leave one open.

Turn the WAISTBAND RIGHT SIDES out through the open end.

Fold back the seam allowance of the open end and sew closed using a small hand stitch such as whip stitch.

Complete the garment by creating the TIES (follow the TIE & STRAP TUTORIAL) and inserting into the TIE LOOPS.

Download the Gabriella Jumpsuit PDF Sewing Pattern here

SaveSave

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

The Tailoress PDF Sewing Patterns - Gabriella Jumpsuit PDF Sewing Pattern

SaveSave

SaveSave

SaveSave

SaveSaveSaveSave

Reviews

'Aʻohe hōʻike manaʻo hou.

Wale ua paʻaʻia i loko o nā mea kūʻai mai, ka poe i kuai ia huahana e haʻalele i ka hōʻike.



Swimwear

Nānā i ka huahelu o ka swimsuit lauana
Shares