लिरा कोलाहल करते हुए खेलनेवाली पजामा ट्यूटोरियल छवियाँ पैटर्न डाउनलोड में उपलब्ध हैं. चरण 1 1.5सेमी सीवन भत्ता सभी पैटर्न टुकड़े काटें शामिल. वापस के साथ एक साथ सामने दाएँ पक्ष निर्धारित करना. पिन और कंधे सीवन में सिलाई. सीवन भत्ता टेढ़े-मेढ़ी सिलाई का उपयोग कर या एक overlocking सिलाई समाप्त. सीवन भत्ता ट्रिम. उपयोग […]
छवियाँ पैटर्न डाउनलोड में उपलब्ध हैं. चरण 1 With the two KNOT HAT pieces RIGHT SIDES together, pin around the seam allowance, leaving the lower edge open. पिन ,stitch and trim the seam allowances. चरण 2 कट गया 2 of the BEANIE HAT pattern pieces for the inner hat. With RIGHT SIDES together, fold the […]
छवियाँ पैटर्न डाउनलोड में उपलब्ध हैं. चरण 1 Begin by cutting out the pattern pieces. With RIGHT SIDES together, fold the darts. पिन, stitch and trim the seam allowance of the dart. चरण 2 With the two hat pieces RIGHT SIDES together, pin around the seam allowance, leaving the lower edge open. पिन ,टांका […]
छवियाँ पैटर्न डाउनलोड में उपलब्ध हैं. चरण 1 Begin by cutting out the pattern pieces. With RIGHT SIDES together, fold the darts. पिन, stitch and trim the seam allowance of the dart. चरण 2 With the two hat pieces RIGHT SIDES together, pin around the seam allowance, leaving the lower edge open. पिन ,टांका […]
छवियों को डाउनलोड संस्करण में उपलब्ध हैं. अनुभाग 1 ध्यान दें: आप प्रिंट कर रहे हैं पैटर्न ए 4 पृष्ठों पर विभाजित, पहले पृष्ठों की व्यवस्था और सुनिश्चित करने के लिए आप सही टुकड़ों को एक साथ मेल खाते हैं एक साथ चिपके रहते हैं. वापस टुकड़े दाएँ पक्ष एक साथ निर्धारित करना. पिन और केंद्र वापस सीवन सिलाई. ट्रिम और सीवन भत्ता समाप्त. […]
Images are available in the downloaded version Step 1 प्रिंट पैटर्न टुकड़ा, टुकड़े में से किसी को काटने का प्रयास करने से पहले पृष्ठों को एक साथ रहना सुनिश्चित. टुकड़े को काटने से शुरू. चरण 2 लेज़ सामने 1 RIGHT SIDES together with the BACK. पिन, stitch and trim the side seam allowance. Finish using zig-zag […]
चरण 1 ध्यान दें: आप प्रिंट कर रहे हैं पैटर्न ए 4 पृष्ठों पर विभाजित, पहले पृष्ठों की व्यवस्था और सुनिश्चित करने के लिए आप सही टुकड़ों को एक साथ मेल खाते हैं एक साथ चिपके रहते हैं. हुड टुकड़े या दो में से किसी एक सेट में कटौती करने के लिए चुनें (एक अस्तर के लिए). दो हुड टुकड़े दाएँ पक्ष एक साथ निर्धारित करना. पिन और केंद्र सिलाई […]