STEP 1:
बाहर कट सभी पैटर्न टुकड़े.
इसकी चौड़ाई के साथ आधे में आस्तीन कफ गुना. Match the raw edges of the folded CUFF to the SLEEVE.
Ease (stretch the CUFF enough to reach from side to side) onto the end of the SLEEVE. पिन और सिलाई.
STEP 2:
Take the HEM CUFF and NECKLINE CUFF (refer to Step 5 if you are using the NECK WARMER CUFF) and fold in half RIGHT SIDES together to create a continuous loop. पिन और कम सीवन भत्ते सिलाई.
STEP 3:
Match the back of the SLEEVE to the BACK RIGHT SIDES TOGETHER.
पिन और जगह में सिलाई.
STEP 4:
Match the FRONT to the front side of the SLEEVE. पिन और पहले की तरह सिलाई.
दोहराएँ कदम 3-4 परिधान के दूसरे पक्ष के लिए.
STEP 5:
एक साथ आगे और पीछे दाएँ पक्ष निर्धारित करना, pin from the side seam from the SLEEVE CUFF down to the garment hem.
सिलाई और सीवन भत्ता खत्म.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary
STEP 6:
परिधान हेम को हेम कफ लागू करें, एक साथ दाएँ पक्ष. Match the centre front and back points.
चारों ओर आसानी समान रूप से तो पिन और जगह में सिलाई.
सीवन भत्ता समाप्त.
STEP 7:
Skip to Step 10 if you are using the NECK WARMER or Step 13 गर्दन कफ के लिए.
हुड टुकड़े दाएँ पक्ष एक साथ निर्धारित करना. Pin and stitch around the outside seam line.
STEP 8:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
STEP 9:
Overlap the two seam allowances of the HOOD CUFF so one is behind then other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.
STEP 10:
Fold the NECK WARMER CUFF in half along the centre fold line.
STEP 11:
Sew the raw edges together.
STEP 12:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. पिन और सिलाई.
STEP 13:
WITH NECKLINE CUFF
Fold the NECKLINE CUFF in half, matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, एक साथ दाएँ पक्ष.
Pin and stitch in place and finish the seam allowance.