Mus ib ruam taw 1:
Suitable for fleece/jersey/towelling fabric
Turn the SLEEVE cuff back 1.5cm to the RIGHT SIDE, then fold it again back on itself 3cm.
Top stitch close to the edge on the RIGHT SIDE.
Mus ib ruam taw 2:
Match the back SLEEVE armhole with the BACK, LUB SIJ HAWM ua ke.
Pin thiab stitch. Finish with either an overlocker or zig-zag stitch. Luas cov leeg nyiaj.
Mus ib ruam taw 3:
Match the FRONT armhole with the front SLEEVE, LUB SIJ HAWM ua ke.
pin, stitch and finish as before.
Rov kauj ruam 1-2 rau lwm qhov armhole.
Mus ib ruam taw 4:
Muab cov PEM HAUV NTEJ TXOJ CAI sab ua ke nrog lub ROV QAB, matching the side seam and SLEEVE seam allowances.
pin, ntxiv thiab tas.
Clip yuav luag txog qhov nyiaj seam ntawm lub hauv qab taw tes kom tso cai rau cov khaub ncaws kom pw ncaj nraim ib zaug. Yog tias koj tau ua tiav cov seam nyiaj nyob ze ntawm lub cev qhov no yuav tsis tsim nyog
Mus ib ruam taw 5:
Finish the garment hemline using your preferred finishing method.
Turn the hemline towards the WRONG SIDE 1.5cm.
Topstitch to secure.
Mus ib ruam taw 6:
Fold the length of the COLLAR in half RIGHT SIDES together.
Pin and stitch the two shorter ends. Clip the corners and trim down to 5mm.
Tig RIGHT SIDES tawm.
Mus ib ruam taw 7:
Match the raw edges of the COLLAR around the garment opening.
pin, ntxiv thiab tas.
Top stitch close to the seam from the RIGHT SIDE to secure the seam allowance flat.
Mus ib ruam taw 8:
Lay the two WAISTBAND pieces RIGHT SIDES together.
Pin and stitch all around leaving a gap of approximately 10cm to turn right sides out.
Turn RIGHT SIDES out and press seams flat. Top stitch around the edges to hold flat and seal the 10cm opening.
Apply a piece of velcro to either side of the WAISTBAND at the ends, approximately 5cm long.
Mus ib ruam taw 9:
Align the WAISTBAND with the underarm points.
Top stitch through the WAISTBAND and BACK to secure in place.