Mus ib ruam taw 1:
Txiav tawm tag nrho cov qauv daim.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Mus ib ruam taw 2:
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
Mus ib ruam taw 3:
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
Mus ib ruam taw 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
Mus ib ruam taw 5:
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin thiab ntxiv cov leeg nyiaj.
Mus ib ruam taw 6:
Fold lub TIE nyob rau hauv ib nrab raws nws ntev RIGHT SIDES ua ke. Muab ib txoj hlua ntev rau hauv-nruab nrab. Sew hla sab saum toj kom ruaj ntseg rau txoj hlua TIE. Pin thiab sew lub seam nyiaj. Ua tib zoo rub txoj hlua tig TIE RIGHT SIDES tawm.
Yog hais tias koj muaj ib tug voj Turner:
Fold lub TIE nyob rau hauv ib nrab lengthways thiab sew lub seam nyiaj. Tig CAI sab tawm siv ib leeg Turner.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Ntxig rau hauv lub WAISTBAND mus ua kom tiav.
Yog tias koj muaj ib daim ntawv txuas nrog koj tuaj yeem siv nws nrog zig-zag stitch los tsim koj cov kev sib raug zoo.
Mus ib ruam taw 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin thiab stitch. Ua kom tiav cov nyiaj seam.