GET THE AMIR TEE PDF PATTERN HERE
STEP 1:
Lay FRONT dwa kote sa yo ansanm ak BACK a ansanm Couture a zepòl.
PIN ak Stitch nan plas.
Sèvi ak zig-zag fil oswa lòt fil detire nan tout pwojè sa a. Epitou asire yo sèvi ak yon biy Jersey machin zegwi.
STEP 2:
SKIP TO STEP 4 FOR SLEEVE
Louvri moute rad la ak kote sa yo dwa moute.
Take the LEG CUFF piece and fold in half lengthways.
Fasilite manchèt yo janm anmanchur nan, distributing it evenly around. PIN ak Stitch.
Fini Couture la ak yon overlocker oswa zig zag fil.
Repeat Steps 1 ak 2 for the other armhole.
STEP 3:
Avèk rad kote sa yo mal soti, matche ak alokasyon yo bò Couture asire fè aliman pwaye yo janm.
Pin and stitch the seam allowances on both sides. Fini Couture la tankou anvan.
STEP 4:
Fold the SLEEVE CUFF in half along its width.
Ease onto the end of the SLEEVE. PIN ak Stitch.
STEP 5:
Open up the FRONT and BACK RIGHT SIDES towards you.
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
STEP 6:
Avèk rad kote sa yo mal soti, lay the FRONT and BACK RIGHT SIDES together.
PIN, stitched, trim and finish from the SLEEVE CUFF to the hem along the side seam.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary.
STEP 7:
Pran manchèt nan HEM ak kol manchèt (refer to Step 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) and fold in half RIGHT SIDES together to create a continuous loop. Pin and stitch the short seam allowances.
STEP 8:
Aplike manchèt nan HEM tout woulèt la rad, BÒ DWAT ansanm.
Ease around evenly then pin and stitch in place.
Fini alokasyon an Couture.
STEP 9:
USING THE NECKLINE CUFF – SKIP TO STEP 10 FOR NECK WARMER, STEP 13 FOR HOOD.
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, BÒ DWAT ansanm.
Pin and stitch in place and finish the seam allowance.
STEP 10:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
STEP 11:
Sew the raw edges together.
STEP 12:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. PIN ak Stitch.
STEP 13:
Lay moso HOOD kote sa yo dwa ansanm. Pin and stitch around the outside seam line.
STEP 14:
Take the HOOD CUFF, fold it in half matching the longest seam allowances. Pin and stitch to the HOOD opening.
STEP 15:
Overlap the two seam allowances of the HOOD CUFF so one is behind the other. Apply the centre of the HOOD CUFF to the centre front of the garment.
Match the centre back of the HOOD with the centre back of the garment. Pin and stitch around.