STEP 1:
Skip this step if you plan to not use the HOOD:
Lay moso HOOD kote sa yo dwa ansanm. PIN ak stitched ozalantou sant la tounen Couture alokasyon.
Ensure to use a ballpoint jersey machine needle.
STEP 2:
Take the HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.
If you are not adding the hood, repeat this step for the NECKLINE CUFF.
STEP 3:
Fold the SLEEVE CUFF in half along its width.
Ease onto the end of the SLEEVE. PIN ak Stitch.
STEP 4:
Repeat STEP 3 for the HOOD CUFF.
Skip this Step if you are not using the HOOD.
STEP 5:
Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.
PIN ak Stitch nan plas.
STEP 6:
Open up the FRONT and BACK RIGHT SIDES towards you.
Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
STEP 7:
Avèk rad kote sa yo mal soti, lay the FRONT and BACK RIGHT SIDES together.
PIN, stitched, trim and finish from the SLEEVE CUFF to the hem along the side seam.
STEP 8:
WITH HOOD:
Pran HOOD nan. Sipèpoze manchèt seksyon sou chak lòt.
Koresponn ak sant devan ak nan sant pwen tounen nan kapo a nan devan an ak seksyon BACK. Èske sa a pa plisman rad la nan mwatye epi ajoute Pins yo ki make pwen yo. Repete pou HOOD a Lè sa a matche ak broch yo ansanm.
PIN ak Stitch nan plas.
WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. PIN ak Stitch nan plas.
STEP 9:
Apply the HEM CUFF by folding in half along the width and easing around the hemline. PIN ak Stitch nan plas.