Valentina stílus 2 oktatói

 

LÉPÉS 1:

Use the largest stitch on your machine and sew a row within the seam allowances of the shoulder and waistline on the TOP FRONT and BACK pieces. Sew between the facing marks on the FRONT pieces and between the facing and neckline marks on the BACK.

 

LÉPÉS 2:

Gather the shoulder seam allowances of the FRONT and BACK pieces to 17cm.

Match the FRONT and BACK pieces RIGHT SIDES together. Pin és öltés a váll varratok. Finish the seam allowances using zig zag stitch or an overlocker. Press the seam toward the back.

Fold back the facings and press. You may like to hem stitch the facing to the inside of the garment if it won’t stay flat.

Pro tip: use french seam finishing for sturdy and tidy seams.

 

LÉPÉS 3:

Open up the TOP piece RIGHT SIDES up.

Top stitch the seam allowance flat to secure.

 

LÉPÉS 4:

Fektesse le a derékpántot 1 JOBB OLDAL DERÉKSZÍNIVAL együtt 2. Varrja fel a varratráhagyásokat a jelölőkig. Hajtsa össze és nyomja félbe a DERÉKSZÍJT hosszában, jelentkezésre készen.

 

LÉPÉS 5:

Gather the waistline of the TOP pieces to fit the WAISTBAND.

Match the central and side seam points together. Overlap the TOP pieces by 2cm at the side and central points.

Ensure to pin the openings on the WAISTBAND carefully so they lay neatly when stitched.

 

LÉPÉS 6:

Hajtsa félbe a nyakkendőt a JOBB OLDAL hosszában. Helyezzen egy szál hosszúságot közé. Varrja át a tetejét, hogy rögzítse a madzagot a TIE-hez. Rögzítse és varrja a varratráhagyást. Óvatosan húzza meg a zsinórt, és fordítsa ki a JOBB OLDALT.

Ha van egy hurok esztergályos:
Hajtsa félbe a TIE-t hosszában, és varrja el a varratráhagyást. Kapcsolja jobb oldalán végre a varrás esztergályos.

Fejezze be a TIE-t úgy, hogy megnyomja, és kétszer fordítsa alá a nyers végeket, majd kis öltésekkel rögzítse. Or simply tie a knot at each end. Helyezze be a derékpánt teljes.

Ha rendelkezik irattartóval, használhatja cikk-cakk öltéssel a nyakkendők elkészítéséhez.

 

LÉPÉS 7:

RUHÁHOZ VAGY RUHÁHOZ
Kövesse az útmutatót a SZOKNYA vagy NADRÁG elkészítéséhez.

Illessze a középső elejét, a FELSŐ és a SZOKNYA vagy a NADRÁG JOBB OLDAL hátsó és oldalsó varrása össze.

Pin és öltés. Fejezd be a ráhagyás.

TOP
Complete by creating and inserting the tie.