MELANGKAH 1:
Silakan baca petunjuk pencetakan!
Buat kantong bilur di bagian DEPAN. Follow the welt pocket tutorial included or find it here: https://www.the-tailoress.com/product/welt-pockets-pdf-sewing-pattern/
MELANGKAH 2:
Dengan TIES SISI SALAH up, lipat kembali 1cm dari salah satu ujung. Lipat kembali 5mm di sepanjang kedua sisi panjang dan tekan. Kemudian lipat TIE setengah menyembunyikan tepi baku yang sebelumnya berubah di. Stitch di tempat.
Salah satu ujung akan tetap tepi baku, ini akan dijahit ke lapisan sisi garmen.
MELANGKAH 3:
Lipat COLLAR KANAN SISI bersama-sama membujur. Menjahit tunjangan jahitan bawah bersama-sama. Klip sudut dan memangkas tunjangan jahitan. Berubah SISI KANAN dan tekan.
MELANGKAH 4:
Lay FRONT dan KEMBALI KANAN SISI bersama-sama. Pin dan menjahit tunjangan jahitan bahu.
Ulangi untuk sisi lain.
MELANGKAH 5:
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK pieces. Matching the underarm points.
Pin and stitch the seam allowance between the underarm points.
Tekan jahitan terbuka. Ulangi untuk SLEEVE lainnya.
MELANGKAH 6:
Dengan pakaian SISI SALAH keluar, match the SLEEVE seam allowances and the side seams of the FRONT and BACK.
Insert the TIE at the tie insertion point of the side seam on one side. Insert it between the FRONT and BACK so that it is visible on the RIGHT SIDE of the garment once sewn.
Pin and stitch the SLEEVE from the underarm point at the sleeve opening, around the curve to the lowest inside point of the SLEEVE. Finish the seam allowances by clipping the curved edge and trimming to 7mm.
Pin and stitch the side seam from the underarm point to the hemline. Turn RIGHT SIDES out and press the seams allowances.
MELANGKAH 7:
With the RIGHT SIDES out, pin the COLLAR around the centre front and neckline of the FRONT and BACK.
Pin the remaining TIE at the tie insertion point on the opposite side to where the side seam TIE is placed, on the centre FRONT.
Stitch just within the seam allowance.
MELANGKAH 8:
Follow Steps 4-6 to create the lining, ignoring references to the TIES and there’s no need to clip the SLEEVE seam allowance.
MELANGKAH 9:
Arrange the lining RIGHT SIDES together with the main garment. Pin and stitch around the centre front opening, including the COLLAR.
Stitch di tempat.
Berubah SISI KANAN dan tekan.
MELANGKAH 10:
Turn back the seam allowances of the SLEEVE at both openings. Secure with small hand stitches. tekan.
Turn up the main garment hemline 1 inch / 2.5cms and press. Turn up the lining hemline the same amount and pin. Sew together using hem stitch.