GET THE AMIR TEE PDF PATTERN HERE
Ntụpụ ụkwụ 1:
Lay the FRONT RIGHT SIDES together with the BACK along the shoulder seam.
Pin na stitch na ebe.
Use zig-zag stitch or other stretch stitch throughout this project. Also ensure to use a ballpoint jersey machine needle.
Ntụpụ ụkwụ 2:
SKIP TO STEP 4 FOR SLEEVE
Open up the garment with the RIGHT SIDES up.
Take the LEG CUFF piece and fold in half lengthways.
Ease the LEG CUFF to the armhole, distributing it evenly around. Pin na stitch.
Finish the seam with an overlocker or zig zag stitch.
Repeat Steps 1 na 2 for the other armhole.
Ntụpụ ụkwụ 3:
Na uwe na-ezighị ezi, match the side seam allowances ensuring to align the LEG CUFFS.
Pin and stitch the seam allowances on both sides. Finish the seam as before.
Ntụpụ ụkwụ 4:
Gbakọọ SLEEVE CUFF na ọkara n'obosara ya.
Ease onto the end of the SLEEVE. Pin na stitch.
Ntụpụ ụkwụ 5:
Open up the FRONT and BACK RIGHT SIDES towards you.
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
Ntụpụ ụkwụ 6:
Na uwe na-ezighị ezi, dokọta akuku aka nri na azụ ọnụ.
Pin, stitch, belata ma mechaa site na SLEEVE CUFF ruo n'ọnụ ọnụ n'akụkụ ọnụ.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary.
Ntụpụ ụkwụ 7:
Were HEM CUFF na NECKLINE CUFF (refer to Step 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) ma tụgharịa na ọkara akụkụ aka nri ọnụ iji mepụta loop na-aga n'ihu. Kpeo ma dụchie obere ohere ịnya mmiri.
Ntụpụ ụkwụ 8:
Tinye HEM CUFF na akwa uwe, Nri n'akụkụ ọnụ.
Mee ka ọ dị mfe n'otu n'otu wee pinye ma kpachie ebe.
Mechaa ego nrịbama.
Ntụpụ ụkwụ 9:
USING THE NECKLINE CUFF – SKIP TO STEP 10 FOR NECK WARMER, Ntụpụ ụkwụ 13 FOR HOOD.
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Nri n'akụkụ ọnụ.
Kpeo na stitch n'ebe ma mechaa ego nrịbama.
Ntụpụ ụkwụ 10:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
Ntụpụ ụkwụ 11:
Sew the raw edges together.
Ntụpụ ụkwụ 12:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin na stitch.
Ntụpụ ụkwụ 13:
Debe akụkụ HOOD ọnụ. Kpeo na kpachie gburugburu ahịrị n'èzí.
Ntụpụ ụkwụ 14:
Were HOOD CUFF, mpịakọta ya na ọkara dabara na ohere ịnya mmiri kacha ogologo. Tinye na stitch na oghere HOOD.
Ntụpụ ụkwụ 15:
Mechie ohere nke abụọ nke HOOD CUFF ka otu n'azụ nke ọzọ. Tinye etiti HOOD CUFF na etiti ihu uwe ahụ.
Dakọtara etiti azụ HOOD na etiti azụ uwe ahụ. Kpeo na kpachie gburugburu.