FARE UN PASSO 1:
Tagliare tutti i pezzi del modello.
Lay the main fabric and lining fabric RIGHT SIDES together of the bottoms.
Pin together. Stitch using zig-zag stitch or a stretch stitch on an overlocker.
Ensure to leave open the section for turning right sides out later.
margini di cucitura Trim.
FARE UN PASSO 2:
Girare lati destro fuori.
Fold the seam allowances of the open section to the inside and sew using small whip stitches by hand.
FARE UN PASSO 3:
Fold the TIE LOOPS in half following the dashed line on the pattern piece.
Cucire la cucitura.
Girare lati destro con la linea di cucitura al centro interiore.
FARE UN PASSO 4:
Lay the FRONT TOP main fabric and lining fabric RIGHT SIDES.
Pin together. Cucire.
Ensure to leave open the section for turning right sides out later and also the openings for the TIE LOOPS.
margini di cucitura Trim.
FARE UN PASSO 5:
Fold the TIE LOOPS in half lengthways matching the raw seam allowances. Insert the TIE LOOPS into the FRONT of the swimsuit, tra il tessuto interno ed esterno.
Pin and stitch the seam allowances.
FARE UN PASSO 6:
Pull the swimsuit RIGHT SIDES out through the open sections on the top and bottoms.
Piegare il margine di cucitura dell'apertura all'interno. Fissare con piccolo, whip stitches.
FARE UN PASSO 7:
Ci sono 3 options for completing the TIES.
Opzione 1: Fold the TIE in half along its length RIGHT SIDES together. Place a length of string in-between. Sew across the top to secure the string to the TIE. Pin and sew the seam allowance. Carefully pull the string turning the TIE RIGHT SIDES out.
Opzione 2: Se si dispone di un tornitore ciclo:
Fold the TIE in half lengthways and sew the seam allowance. Girare lati destro utilizzando un tornitore cucitura.
Opzione 3: If you have a binder attachment you can use it with zig-zag stitch to create your ties.
Finish the TIE by turning the raw ends under twice and use small stitches to secure or by making a knot at each end. Insert one into each TIE LOOP to complete.