FARE UN PASSO 1:
Tagliare tutti i pezzi del modello.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
FARE UN PASSO 2:
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
FARE UN PASSO 3:
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
FARE UN PASSO 4:
Lay WAISTBAND 1 RIGHT SIDES together with WAISTBAND 2. Sew the seam allowances up to the markers. Fold and press the WAISTBAND in half lengthways, ready to apply.
FARE UN PASSO 5:
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin e cucire il margine di cucitura.
FARE UN PASSO 6:
Fold the TIE in half along its length RIGHT SIDES together. Place a length of string in-between. Sew across the top to secure the string to the TIE. Pin and sew the seam allowance. Carefully pull the string turning the TIE RIGHT SIDES out.
Se si dispone di un tornitore ciclo:
Fold the TIE in half lengthways and sew the seam allowance. Girare lati destro utilizzando un tornitore cucitura.
Finish the TIE by pressing it and turning the raw ends under twice and use small stitches to secure. Inserire nella cintura per completare.
If you have a binder attachment you can use it with zig-zag stitch to create your ties.
FARE UN PASSO 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin e punto. Termina il margine di cucitura.