GET THE AMIR TEE PDF PATTERN HERE
Langkah 1:
Lay FRONT RIGHT lorone bebarengan karo BACK bebarengan lapisan Pundhak.
Pin lan nggawe ing Panggonan.
Gunakake nggawe Zig-Zag utawa nggawe babagan liya saindhenging project iki. Oleh nggunakake mesin ballpoint jersey jarum.
Langkah 2:
SKIP TO STEP 4 FOR SLEEVE
Bukaken sandhangan karo sisih tengen munggah.
Njupuk Piece LEG perban lan melu ing setengah lengthways.
Ease perban LEG kanggo armhole ing, nyebarke iku roto-roto saindhenging. Pin lan nggawe.
Rampung lapisan karo overlocker utawa zig Zag nggawe.
baleni langkah 1 lan 2 kanggo armhole liyane.
Langkah 3:
Kanthi sandhangan lorone WRONG metu, cocog tunjangan sisih lapisan njupuk kempal cuffs LEG.
Pin lan nggawe ing tunjangan lapisan ing loro-lorone. Rampung lapisan minangka sadurunge.
Langkah 4:
Lempitake CUFF SLEEVE ing setengah ing jembaré.
Ease onto the end of the SLEEVE. Pin lan nggawe.
Langkah 5:
Open up the FRONT and BACK RIGHT SIDES towards you.
Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.
Stitch and finish the seam allowance using zig zag stitch or an overlocker.
Langkah 6:
Kanthi sandhangan lorone WRONG metu, lay ing ngarep lan Mburi sisih tengen bebarengan.
Pin, jahitan, trim lan rampung saka CUFF SLEEVE menyang hem sadawane jahitan sisih.
Clip almost up to the seam allowance at the underarm point to allow the garment to lay flat once turned. If you have finished the seam allowance close to the body this may not be necessary.
Langkah 7:
Njupuk CUFF HEM lan NECKLINE CUFF (refer to Step 10 if you are using the NECK WARMER CUFF or Step 13 for HOOD) lan melu ing setengah SISI KANAN bebarengan kanggo nggawe daur ulang terus. Pin lan nggawe ing tunjangan lapisan singkat.
Langkah 8:
Aplikasi perban hem kanggo hem sandhangan, Nang pinggir bebarengan.
Ease watara roto-roto banjur PIN lan nggawe ing Panggonan.
Rampung sangu lapisan.
Langkah 9:
USING THE NECKLINE CUFF – SKIP TO STEP 10 FOR NECK WARMER, Langkah 13 FOR HOOD.
Fold the NECKLINE CUFF in half matching the raw edges. Ease the NECKLINE CUFF around the neckline opening, Nang pinggir bebarengan.
Pin lan jahitan ing panggonan lan rampung tunjangan jahitan.
Langkah 10:
USING THE NECK WARMER
Fold the NECK WARMER CUFF in half along the centre fold line.
Langkah 11:
Sew the raw edges together.
Langkah 12:
Press open the seam allowances. Fold the NECK WARMER CUFF back on itself concealing the seam allowances just sewn and creating a complete loop of doubled up fabric.
Find the centre front and centre back locations on the NECKWARMER and main garment neckline. Match the raw edges of the NECK WARMER to the garment neckline. Pin lan nggawe.
Langkah 13:
Lay bêsik hood lorone RIGHT bebarengan. Pin lan jahitan ing sakubenge garis jahitan njaba.
Langkah 14:
Njupuk CUFF HOOD, melu ing setengah cocog tunjangan jahitan paling dawa. Pin lan jahitan menyang bukaan HOOD.
Langkah 15:
Tumpang tindih loro tunjangan jahitan saka HOOD CUFF supaya siji konco liyane. Aplikasiake tengah CUFF HOOD menyang ngarep tengah sandhangan.
Cocokake tengah mburi HOOD karo tengah mburi sandhangan. Pin lan jahitan watara.