Fido Sweater Tutorial

STEP 1:

Skip this step if you plan to not use the HOOD:

Lay bêsik hood lorone RIGHT bebarengan. Pin lan nggawe sak bek tengah lapisan sangu.

Ensure to use a ballpoint jersey machine needle.

STEP 2:

Take the HEM CUFF, fold it in half lengthways and stitch the seam allowance to form a complete loop.

If you are not adding the hood, repeat this step for the NECKLINE CUFF.

STEP 3:

Fold the SLEEVE CUFF in half along its width.

Ease onto the end of the SLEEVE. Pin lan nggawe.

STEP 4:

Repeat STEP 3 for the HOOD CUFF.

Skip this Step if you are not using the HOOD.

STEP 5:

Match the shoulder seams of the BACK and FRONT RIGHT SIDES together.

Pin lan nggawe ing Panggonan.

STEP 6:

Open up the FRONT and BACK RIGHT SIDES towards you.

Ease the SLEEVE head on to the arm opening. Lay the SLEEVE RIGHT SIDES together with the FRONT and BACK. Pin to the underarm points of the side seams and the center of the SLEEVE head to the shoulder point. Ease the rest in.

Stitch and finish the seam allowance using zig zag stitch or an overlocker.

STEP 7:

Kanthi sandhangan lorone WRONG metu, lay the FRONT and BACK RIGHT SIDES together.

Pin, stitch, trim and finish from the SLEEVE CUFF to the hem along the side seam.

STEP 8:

WITH HOOD:
Njupuk hood. Tumpang tindih bagean perban dhateng saben liyane.

Cocokake ngarep tengah lan tengah TCTerms mburi hood menyang FRONT lan bagean BACK. Apa iki dening lempitan sandhangan ing setengah lan nambah lencana kanggo nandhani TCTerms. Baleni kanggo hood banjur cocog lencana bebarengan.

Pin lan nggawe ing Panggonan.

WITHOUT HOOD:
Apply the NECKLINE CUFF by folding in half along the width then easing around the neckline. Pin lan nggawe ing Panggonan.

STEP 9:

Apply the HEM CUFF by folding in half along the width and easing around the hemline. Pin lan nggawe ing Panggonan.