Tutorial Joey Tee
[printfriendly]
Images kasedhiya ing download pola.
[wc_accordion collapse=”0″ leaveopen=”0″ kelas =”” layout=”box”]
[wc_accordion_section title=”Step 1″]
Cut out all pieces marking any balance or ease marks. This garment will have reasonable stretch to it so it is recommended to use zig-zag stitch wherever a seam is constructed.
Lay the front edge of the SLEEVE armhole to the FRONT armhole, Nang pinggir bebarengan.
Pin and stitch the seam allowance.
Repeat for the other FRONT side.
[/wc_accordion_section]
[wc_accordion_section title=”Step 2″]
Lay the back SLEEVE armhole to the BACK armhole RIGHT SIDES together.
Pin and stitch the seam allowance.
Repeat for the other BACK side.
Finish all sleeve seam allowances using an overlocker or zig-zag stitch. Motong yen perlu.
[/wc_accordion_section]
[wc_accordion_section title=”Step 3″]
Kanthi sandhangan lorone WRONG metu, align the side seams and SLEEVE seams.
Pin and stitch continuously from SLEEVE cuff to the garment hem.
Finish the seam allowances as before.
[/wc_accordion_section]
[wc_accordion_section title=”Step 4″]
WITHOUT HOOD:
Melu ing setengah gulu perban RIGHT lorone bebarengan lan jahitan sangu lapisan singkat.
Melu ing gulu perban ing setengah supaya sudhut mentahan ketemu.
Ease sak neckline sandhangan. Pin lan nggawe ing Panggonan.
For HOOD see Steps 5-7.
[/wc_accordion_section]
[wc_accordion_section title=”Step 5″]
WITH HOOD:
Lay two HOOD pieces RIGHT SIDES together. Pin and stitch the center back seam allowance. Trim and finish the seam allowance with zig-zag stitch or an overlocking stitch.
[/wc_accordion_section]
[wc_accordion_section title=”Step 6″]
Complete the hood by folding the front opening seam allowance back 0.75mm then again 0.75mm. Pin and stitch in place to finish the seam.
[/wc_accordion_section]
[wc_accordion_section title=”Step 7″]
Ease the neckline of the HOOD on to the garment neckline. Overlap the centre front edges of the HOOD by 1.5cm onto each other.
Pin lan nggawe. Rampung sangu lapisan.
You may like to top-stitch the seam allowance flat towards the bottom of the garment.
[/wc_accordion_section]
[wc_accordion_section title=”Step 8″]
Ngrampungake hem sandhangan lan cuffs dening pagawean sangu lapisan, banjur lempitan maneh 1.5cm lan ndhuwur-jahitan kanggo ngamanake.
Pencet kabeh lapisan.
[/wc_accordion_section]
[/wc_accordion]