Langkah 1:
Cut kabeh potongan pola.
With the TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Finish the seam allowance of the top edge using an overlocking stitch or zig-zag. Fold back the top edge 2.5cm and press.
Mark and fold the pleats – making sure to mark with the side seams in the centre, stitch and press.
Langkah 2:
Match each front pleat to its corresponding back pleat.
Sew across the join using a tight zig zag stitch.
Langkah 3:
Prepare the SHOULDER BINDING by folding and pressing the seam allowances to the WRONG SIDE.
Prepare the TOP shoulders by folding the fabric downwards at an angle toward the WRONG SIDE, creating more pleats.
Langkah 4:
Finish the shoulder by encasing the TOP shoulders inside the SHOULDER BINDING.
Secure the edges of the SHOULDER BINDING with small hand stitches to secure in place.
Langkah 5:
Lay WAISTBAND 1 Sisih tengen bebarengan karo WAISTBAND 2. Jahit tunjangan jahitan nganti spidol. Melu lan pencet WAISTBAND ing setengah lengthways, siap nglamar.
Langkah 6:
Gather the waistline of the TOP to fit the WAISTBAND.
An easy way to do this is to sew a row of straight stitch on the longest stitch setting, wrap one thread end around a needle then gently pull the other end to gather. Secure the second thread end to the pin.
Pin and stitch the WAISTBAND to the TOP matching the centre front and back points. If you intend to make the dress or jumpsuit, sew just within the 1.5cm seam allowance.
Langkah 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin lan nggawe. Rampung sangu lapisan.
Langkah 8:
Tempelake TIE dadi setengah ing sisih tengen sing dawane bebarengan. Selehake dawa senar ing antarane. Jahit ing sisih ndhuwur kanggo ngamanake senar menyang TIE. Pin lan jahitan sangu jahitan. Tarik tali kasebut kanthi ati-ati kanthi ngowahi SISI KANAN.
Yen sampeyan duwe turner daur ulang:
Melu TIE ing setengah lengthways lan jahitan sangu jahitan. Nguripake lorone RIGHT metu nggunakake turner lapisan.
Rampungake TIE kanthi mencet lan ngowahi ujung mentah ing ngisor kaping pindho lan gunakake jahitan cilik kanggo ngamanake. Pasang menyang waistband kanggo ngrampungake.
Yen sampeyan duwe lampiran binder, sampeyan bisa nggunakake jahitan zig-zag kanggo nggawe dasi..