Langkah 1:
Cut kabeh potongan pola.
With the FRONT and BACK TOP pieces RIGHT SIDES together, pin and stitch the side seam allowances.
Langkah 2:
Apply bias binding to the centre back and armhole seam allowances.
pin and stitch binding RIGHT SIDES together.
trim seam allowance to the finished binding width. Clip armhole seam allowance.
Press the seam.
Finish the binding by turning the un-sewn raw edge to the inside and matching the fold to the stitch line. Top stitch in place.
Langkah 3:
Fold down the necklines of the FRONT and BACK TOP pieces 5mm then again 20mm toward the WRONG SIDE. Topstitch in place.
Langkah 4:
Lay WAISTBAND 1 Sisih tengen bebarengan karo WAISTBAND 2. Jahit tunjangan jahitan nganti spidol. Melu lan pencet WAISTBAND ing setengah lengthways, siap nglamar.
Langkah 5:
Match the centre back of the TOP to the centre back of the WAISTBAND. Repeat for the centre fronts. Finish pinning around the WAISTBAND.
Pin and stitch the seam allowance.
Langkah 6:
Tempelake TIE dadi setengah ing sisih tengen sing dawane bebarengan. Selehake dawa senar ing antarane. Jahit ing sisih ndhuwur kanggo ngamanake senar menyang TIE. Pin lan jahitan sangu jahitan. Tarik tali kasebut kanthi ati-ati kanthi ngowahi SISI KANAN.
Yen sampeyan duwe turner daur ulang:
Melu TIE ing setengah lengthways lan jahitan sangu jahitan. Nguripake lorone RIGHT metu nggunakake turner lapisan.
Rampungake TIE kanthi mencet lan ngowahi ujung mentah ing ngisor kaping pindho lan gunakake jahitan cilik kanggo ngamanake. Pasang menyang waistband kanggo ngrampungake.
Yen sampeyan duwe lampiran binder, sampeyan bisa nggunakake jahitan zig-zag kanggo nggawe dasi..
Langkah 7:
FOR THE JUMPSUIT OR DRESS
Follow the tutorial to make the SKIRT or TROUSERS.
Match the centre front, back and side seams of the TOP and SKIRT or TROUSER RIGHT SIDES together.
Pin lan nggawe. Rampung sangu lapisan.